Airtac MIC Cushioned Mini Cylinder MIC16X250CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X250CM is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke250 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X250CM
Built with a stainless-steel round barrel and piston rod, the AirTAC MIC16X250CM resists mild corrosion and handles washdown environments. This double-acting mini cylinder uses a CM round rear cover and a 250 mm stroke, conforming to the ISO 6432 mounting interface for straightforward bracket integration.
At 0.5 MPa it pushes with 100.5 N of force, yielding a safe working load of about 60 N and a 2:1 vertical lift capacity near 5.1 kg. The defining feature is the adjustable air cushion at both ends: a needle valve lets you tune end-of-stroke deceleration to absorb high-speed shock, reducing noise far better than a fixed bumper. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to an -S variant. The 1/8" port drives its 30-800 mm/s speed range.
Airtac MIC Cushioned Mini Cylinder MIC16X250CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X250CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 250 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X250CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X250CM Is Used
Light Parts Ejection
Pushes small plastic or aluminum parts out of a machining fixture using 100.5 N of force, relying on the tuned air cushion to prevent bouncing at the end of the 250 mm stroke.
Package Diverting
Actuates a lightweight diverter arm on a packaging line, where the adjustable end cushions absorb the kinetic energy of high-speed cycling to protect the mechanism.
Lab Sample Routing
Moves sample trays in washdown-resistant stainless steel housings, decelerating smoothly to avoid spilling liquids despite the compact 16 mm bore.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X250CM the Right Cylinder?
When sizing this 16 mm bore, stepping down is not an option for cushioned MIC models, as smaller bores only offer the bumper-style MI. If you need more force, the MIC20X50 delivers a 157.0 N push at 0.5 MPa compared to this bore's 100.5 N. The adjustable cushion matters most when cycling at high speeds or moving sensitive loads that cannot tolerate abrupt stops.
Because this is a non-locking actuator, the piston will drift if air pressure drops or the valve is centered; use an external rod lock or pilot check valve to hold a load safely. For mounting, pair the CM back cover with compatible rear attachments, and add LB foot or FA flange brackets as needed. Remember that this specific unit has no magnet, so position sensing is impossible on this SKU.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X250CM FAQ
This 16 mm bore cylinder features a 1/8" port and a 6 mm piston rod. At 0.5 MPa it pushes 100.5 N and pulls 86.4 N. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
This specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches; you need an -S variant for sensing. The adjustable air cushion at both ends uses a needle valve to trap and bleed exhaust air, decelerating the piston near stroke end to cut shock. It is a damping feature, not a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X250CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.