Airtac MIC Cushioned Mini Cylinder MIC16X250SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X250SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 250mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke250 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X250SCM
Designed for compact automation, this stainless-steel round-body mini cylinder integrates a needle-set variable air cushion at both ends to absorb high-speed end-of-stroke shock. The Ø16 mm bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. A built-in piston magnet enables position sensing with CMSG, DMSG, or EMSG switches.
Operating double-acting on filtered air via M5×0.8 ports, it generates a 100.5 N push force at 0.5 MPa. This translates to a safe working load of roughly 60 N, or a vertical lift of about 5.1 kg with a 2:1 margin. The CM round rear cover provides specific port and mounting orientation for tight spaces.
Airtac MIC Cushioned Mini Cylinder MIC16X250SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X250SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 250 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X250SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X250SCM Is Used
Light-Part Ejection
Shoots small plastic or metal parts out of a machining center at speed, relying on the adjustable air cushion to prevent end-of-stroke slamming.
Flap Folding
Pushes carton flaps on a packaging line where the 100.5 N push force is sufficient and the stainless build resists occasional washdown.
Lab Sample Routing
Diverts lightweight sample tubes between conveyor lanes, using the built-in magnet and CMSG switches to confirm stroke positions.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X250SCM the Right Cylinder?
For lighter duty, the standard MI16 bumper mini cylinder lacks adjustable cushions but handles smaller impacts. If you need more force, stepping up to the MIC20X50 provides a 157 N push at 0.5 MPa. Choose this MIC16 model when operating at high speeds where the adjustable needle cushion is essential to protect the load and reduce noise.
Remember that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops, the piston will drift, so install an external rod lock or pilot-operated check valve for secure vertical holding. Mounting options include LB foot, FA flange, and TC trunnion, while the -S magnet allows seamless sensor integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X250SCM FAQ
This double-acting cylinder features an M5×0.8 port and a 6 mm piston rod. It delivers a push force of 100.5 N and a pull force of 86.4 N at 0.5 MPa. At 0.7 MPa, the push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and acts as a brake. It does not hold position on air loss. For vertical loads, you must use an external rod lock or pilot check valve. The -S magnet allows CMSG, DMSG, or EMSG sensors for position confirmation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X250SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.