Airtac MIC Cushioned Mini Cylinder MIC16X25CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X25CA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X25CA
High-speed actuation in tight spaces is where this stainless-steel round-body mini cylinder excels. As the double-acting, adjustable-cushion variant in the AirTAC MI family, the MIC16X25CA uses a needle valve at both ends to decelerate the piston, absorbing end-of-stroke shock that would otherwise damage your load. Its 16 mm bore pushes with 100.5 N of force at 0.5 MPa, making it ideal for lighter automation tasks.
Built with a mildly corrosion-resistant stainless barrel and rod, it handles washdown environments better than standard carbon steel units. It conforms to the ISO 6432 mounting interface for Ø16, dropping directly into standard mini-cylinder brackets. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. It uses a 1/8" port, an M6x1.0 male rod thread, and a CA rear pivot cover. Based on its 0.5 MPa push rating, it provides a safe working load of about 60 N, lifting roughly 5.1 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC16X25CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X25CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X25CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X25CA Is Used
Light Part Ejection
Shoots small plastic parts out of a mold at high speed. The adjustable air cushion catches the piston to prevent harsh impact, protecting the 5.1 kg load limit.
Package Diverting
Pushes lightweight cartons on a conveyor line. The stainless build resists humid factory air, while the CA clevis allows the arm to pivot smoothly.
Small Component Sorting
Handles rapid gating for small electronic components. The 100.5 N push force at 0.5 MPa is plenty for moving light trays without crushing them.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X25CA the Right Cylinder?
When sizing this 16 mm bore, stepping down means moving to an MI-series bumper cylinder, which lacks the adjustable air cushion entirely. Stepping up to the MIC20X50 gives you a significant jump to 157.0 N of push force at 0.5 MPa. Choose this 16 mm model for high-speed, lighter loads where minimizing impact noise and shock is critical. The adjustable cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If you need to prevent drift on air loss, install an external rod lock or pilot check valve.
The CA rear pivot cover allows clevis mounting for articulating movements. Because this configuration ships without a magnet, position sensing is impossible unless you upgrade to the -S variant. You can mount it using LB foot brackets, FA flanges, or TC trunnions to fit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X25CA FAQ
This 16 mm bore cylinder uses a 1/8" port and an M6x1.0 male rod thread. It generates 100.5 N of push force and 86.4 N of pull force at 0.5 MPa. At 0.7 MPa, those figures rise to 140.7 N and 120.9 N respectively. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for position sensing. The adjustable air cushions at both ends only serve to decelerate the load, not to hold it in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X25CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.