Airtac MIC Cushioned Mini Cylinder MIC16X25SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X25SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X25SCA
Designed for high-speed actuation where end-of-stroke shock must be tamed, this double-acting stainless-steel mini cylinder features a needle-set adjustable air cushion at both ends. The Ø16 bore generates 100.5 N push and 86.4 N pull at 0.5 MPa, while the 1/8" port and M6x1.0 male rod thread ensure straightforward integration. Its riveted round-body build resists mild corrosion and washdown, and it conforms to the ISO 6432 mounting interface for standard mini brackets.
With a 25 mm stroke and a built-in piston magnet (-S), this unit supports CMSG, DMSG and EMSG position switches. The CA rear pivot cover simplifies clevis mounting. For sizing, expect a safe working load of roughly 60 N, or a vertical lift of about 5.1 kg with a 2:1 margin. The cushion only decelerates the load near stroke end; it does not function as a brake.
Airtac MIC Cushioned Mini Cylinder MIC16X25SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X25SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X25SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X25SCA Is Used
Light-Part Ejection
Kicks small plastic parts out of a molding station at high speed, relying on the adjustable cushion to prevent the 6 mm rod from slamming the end cap.
Package Diverting
Pushes lightweight cartons on a conveyor using the 100.5 N push force, with the CA pivot allowing the cylinder to swing safely on its mount.
Small Component Sorting
Actuates a sorting gate for small electronic components, using the built-in magnet and EMSG switch to confirm the 25 mm stroke position.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X25SCA the Right Cylinder?
If your payload is very light, dropping down to a smaller bumper-style MI cylinder avoids cushion-needle tuning, but you lose the shock absorption needed at 800 mm/s. Stepping up to the MIC20 provides 157 N push at 0.5 MPa if the 100.5 N here is insufficient. At top speeds, dial in the needle valve to smooth the 25 mm travel and protect your payload.
Because the -S magnet is present, you can mount CMSG or EMSG sensors directly for end-position confirmation. The CA back cover allows pivoting, but remember the air cushion only decelerates; it will not hold the load on air loss. Use a pilot-operated check valve for vertical holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X25SCA FAQ
This Ø16 bore cylinder has a 1/8" port and an M6x1.0 male rod thread. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, 140.7 N push and 120.9 N pull at 0.7 MPa, with a theoretical maximum force of 20.5 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end; it is not a brake or lock. If you need to hold a vertical load during air loss, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X25SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.