Airtac MIC Cushioned Mini Cylinder MIC16X30SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X30SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X30SCA
Designed for high-speed actuation, this double-acting stainless steel mini cylinder uses an adjustable air cushion at both ends to decelerate the load smoothly, eliminating the harsh impact of a fixed bumper. The Ø16 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. A built-in piston magnet enables position sensing with CMSG, DMSG, or EMSG switches.
In the 16 mm class, it generates 100.5 N of push force at 0.5 MPa, making it suitable for light-duty routing and sorting. This translates to a safe working load of about 60 N, or a vertical lift capacity of roughly 5.1 kg with a 2:1 safety margin. The riveted stainless barrel and Ø6 mm rod resist mild corrosion and washdown environments, while the 1/8" port and M6x1.0 male rod thread simplify integration.
Airtac MIC Cushioned Mini Cylinder MIC16X30SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X30SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 30 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X30SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X30SCA Is Used
High-Speed Diverter
Snaps small packages at 600 mm/s with the adjustable air cushion absorbing end-of-stroke shock to protect fragile items.
Light-Part Ejector
Pushes lightweight plastic components out of a mold using the 100.5 N @0.5 MPa thrust without slamming the rear cover.
Lab Washdown Station
Operates a routing gate in a damp environment, relying on the stainless barrel and rod for mild corrosion resistance.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X30SCA the Right Cylinder?
When sizing this 16 mm bore, stepping down is not an option within the MIC cushioned range, as smaller diameters rely on fixed bumpers. If you need more force, the next size up is the Ø20 bore, which raises the 0.5 MPa push force from 100.5 N to 157.0 N. The adjustable cushion matters most when cycling at high speeds or moving sensitive loads, allowing you to needle-set the exact deceleration profile.
Because the MIC16X30SCA includes the -S magnet, it is ready for CMSG, DMSG, or EMSG sensors. The rear CA pivot cover provides a clevis mounting point, complementing standard LB, FA, and TC options. Remember that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If power drops, the rod will drift, so fit an external rod lock or pilot check valve for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X30SCA FAQ
At 0.5 MPa it provides 100.5 N push and 86.4 N pull. At 0.7 MPa it provides 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa. This 16 mm bore cylinder uses a 1/8" port.
No, the adjustable air cushion only decelerates the piston near the end of the stroke; it is not a brake or lock. If air pressure drops, the rod will drift. For vertical loads, install an external rod lock or pilot check valve. The built-in -S magnet supports CMSG, DMSG, and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X30SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.