Airtac MIC Cushioned Mini Cylinder MIC16X350CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X350CA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 350mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke350 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X350CA
Built for rapid linear motion, this double-acting stainless steel round-body mini cylinder uses an adjustable air cushion at both ends to decelerate the piston smoothly. Tuning the cushion needle absorbs end-of-stroke shock, protecting your payload and reducing noise far better than a fixed bumper. The Ø16 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises.
At 0.5 MPa it pushes with 100.5 N and pulls with 86.4 N, making the safe working load roughly 60 N. This translates to lifting about 5.1 kg vertically with a 2:1 safety margin. The stainless barrel and rod resist mild corrosion and washdown environments. This specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors; you must order the -S variant for position sensing. It features an M5×0.8 port and a CA rear pivot cover.
Airtac MIC Cushioned Mini Cylinder MIC16X350CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X350CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X350CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X350CA Is Used
Light-Duty Part Ejection
Uses the 100.5 N push force to eject small molded components rapidly, relying on the adjustable air cushion to prevent slamming at the end of a 350 mm stroke.
Pivot-Actuated Flap Control
Leverages the CA rear clevis cover to swing a packaging guide flap, handling the 5.1 kg vertical lift capacity with smooth deceleration.
Lab Sample Diverting
Ideal for washdown-resistant lab sorting thanks to the stainless build, moving light sample trays without harsh end-of-stroke impacts.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X350CA the Right Cylinder?
When sizing this 16 mm bore, stepping down is not an option within the MIC cushioned range, as smaller diameters rely on fixed bumpers. If you need more force, the MIC20X50 offers 157.0 N push at 0.5 MPa. The adjustable cushion matters most when driving heavier loads or operating at high speeds up to 800 mm/s, preventing harsh impacts. Remember that the air cushion only decelerates the stroke; it is not a brake. If your application must hold position on air loss, add an external rod lock or pilot check valve.
The CA back cover provides a rear pivot point for clevis mounting. Because this model has no -S suffix, it lacks a piston magnet and cannot support sensing switches. You can also utilize LB foot, FA flange, or TC trunnion mounts depending on your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X350CA FAQ
This 16 mm bore cylinder features an M5×0.8 port and a 6 mm piston rod with an M6x1.0 male thread. It generates 100.5 N push and 86.4 N pull at 0.5 MPa, increasing to 140.7 N push and 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a piston magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S magnet variant for position sensing. The adjustable air cushion at both ends only decelerates the load near stroke end and does not lock or hold the position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X350CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.