Airtac MIC Cushioned Mini Cylinder MIC16X355SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X355SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 355mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke355 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X355SCA
Dialing in end-of-stroke deceleration is effortless with the AirTAC MIC16X355SCA, a 16 mm bore, 355 mm stroke double-acting mini cylinder. Twin needle-set air cushions absorb high-speed kinetic energy, protecting your payload and reducing workshop noise far better than a fixed rubber bumper. The stainless-steel round barrel and Ø6 mm rod shrug off mild corrosion and washdown environments. Because this compact Ø16 size adheres to the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises. An M5×0.8 port feeds the chamber, while the CA rear pivot cover simplifies articulated mounting.
In force terms, this unit generates 100.5 N of push at 0.5 MPa, making it ideal for light sorting and positioning tasks. For reliable vertical lifting, expect a safe working load of about 60 N, which means it lifts roughly 5.1 kg with a 2:1 safety margin. The integrated -S piston magnet supports CMSG, DMSG, and EMSG switches for exact position detection, operating smoothly at speeds between 30 and 800 mm/s.
Airtac MIC Cushioned Mini Cylinder MIC16X355SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X355SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 355 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X355SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×355 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X355SCA Is Used
High-Speed Shuttle Transfer
Moving small electronic components along a 355 mm horizontal track, where the adjustable air cushions silently absorb the rapid 800 mm/s reversals without jarring fragile parts.
Light Vertical Dosing
Lifting and lowering a 4 kg fluid valve using the 5.1 kg safe vertical lift capacity, relying on the CA pivot cover to maintain precise angular alignment during actuation.
Lab Washdown Positioner
Indexing sample trays in a humid testing chamber, leveraging the stainless steel barrel and rod to resist mild corrosion while the ISO 6432 dimensions ensure easy bracket replacement.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X355SCA the Right Cylinder?
When sizing this 16 mm bore unit against the broader MIC family, stepping up to the Ø20 bore significantly increases capability, raising the 0.5 MPa push force to 157 N for heavier slides. Dropping down is not an option within the cushioned MIC range, as smaller 8, 10, and 12 mm bores rely solely on fixed bumpers and lack the adjustable needle deceleration needed to smooth out high-velocity strokes. Choose the MIC16X355SCA specifically when you need to move light loads quickly and want to eliminate end-cap shock. The adjustable cushion only decelerates the piston near the stroke ends; it does not function as a brake. If your application must hold a vertical load during a complete air loss or valve centering, add an external rod lock or a pilot-operated check valve to prevent drift. The built-in -S magnet pairs directly with CMSG, DMSG, or EMSG sensors, and the CA back cover provides a robust pivot point for your mechanical linkage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X355SCA FAQ
This double-acting cylinder features an M5×0.8 air port and a 6 mm piston rod with an M6x1.0 male thread. At 0.5 MPa it provides 100.5 N push and 86.4 N pull force. At 0.7 MPa those figures rise to 140.7 N push and 120.9 N pull. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
The MIC16X355SCA uses a needle-adjustable air cushion at both stroke ends to decelerate the piston smoothly, which is a major upgrade over fixed bumpers for high-speed cycles. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG electronic or reed switches for precise end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X355SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.