Airtac MIC Cushioned Mini Cylinder MIC16X450CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X450CA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 450mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke450 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X450CA
Built with a stainless steel round barrel and rod, this double-acting mini cylinder handles mild washdown environments while delivering a 100.5 N push at 0.5 MPa. The 450 mm stroke operates at 30-800 mm/s, and the M5×0.8 port feeds the 6 mm piston rod. A CA rear pivot cover simplifies clevis mounting.
Unlike standard bumper units, the MIC series integrates a needle-adjustable air cushion at both ends to decelerate high-speed loads smoothly. This bore uses the ISO 6432 mounting interface for standard bracket interchange. It yields a safe working load of roughly 60 N, lifting about 5.1 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC16X450CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X450CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 450 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X450CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X450CA Is Used
Light-Duty Diverters
Ideal for routing small packages on a conveyor, using the 100.5 N push force to actuate guide arms rapidly without end-of-stroke slamming.
Small Part Ejection
Ejects lightweight molded components from a press area, relying on the adjustable air cushion to decelerate the 450 mm travel smoothly.
Lab Sample Sorting
Moves sample trays in washdown-prone lab settings where the stainless steel build resists mild corrosion and the CA pivot absorbs lateral play.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X450CA the Right Cylinder?
When sizing this unit, stepping down is not an option for cushioned models, as smaller bores lack the adjustable air cushion feature. Stepping up to the MIC20X50 increases the 0.5 MPa push force to 157 N for heavier payloads. The dual end cushions are essential for this 450 mm stroke when moving loads at high speed, as they absorb end-of-stroke shock.
Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors for position detection. Note that the air cushion only decelerates the piston near stroke end; it does not act as a brake. If your application requires load holding on air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X450CA FAQ
This 16 mm bore cylinder features an M5×0.8 port and a 6 mm rod with an M6x1.0 thread. It generates a push force of 100.5 N and a pull force of 86.4 N at 0.5 MPa. At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. The adjustable air cushion at both ends only serves to decelerate the load near stroke end, not to hold it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X450CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.