Airtac MIC Cushioned Mini Cylinder MIC16X45SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X45SU is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 45mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X45SU
Dial in end-of-stroke deceleration with the AirTAC MIC16X45SU, a 16 mm bore, 45 mm stroke double-acting stainless steel mini cylinder. A needle-set variable air cushion at both ends absorbs high-speed shock, protecting your payload and cutting workshop noise far better than a fixed rubber bumper. The stainless round barrel and Ø6 mm piston rod shrug off mild corrosion and washdown environments, while the U-style 90-degree rear cover simplifies port and mounting orientation in tight spaces.
In the 16 mm force class, this ISO 6432 mounting-interface cylinder generates 100.5 N push and 86.4 N pull at 0.5 MPa, peaking at a theoretical 20.5 kgf at 1.0 MPa. For practical sizing, expect a safe working load around 60 N, meaning it lifts about 5 kg vertically with a 2:1 safety margin. The built-in -S piston magnet supports CMSG, DMSG, and EMSG position switches, and the 1/8" air port matches standard mini-cylinder plumbing.
Airtac MIC Cushioned Mini Cylinder MIC16X45SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X45SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 45 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X45SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X45SU Is Used
Light Part Ejection
Pushes small plastic or stamped parts out of a die at speed, using the adjustable cushion to prevent the 100.5 N impact from marking the components.
Package Diverting
Snaps a lightweight carton onto a secondary line; the stainless build handles occasional washdown while the cushion softens the 45 mm stroke stop.
Lab Sample Handling
Moves delicate test tubes or vials horizontally, where the 5 kg vertical lift capacity and smooth needle-set deceleration protect against spillage.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X45SU the Right Cylinder?
When sizing this 16 mm bore, compare it directly against the next size up: a 20 mm MIC bore yields 157 N push at 0.5 MPa for heavier slides, while the 16 mm is your best fit for compact, lighter payloads under 60 N. The adjustable air cushion matters most when cycling at high speeds or moving delicate components that cannot tolerate a hard impact. Because the 45 mm stroke unit uses a U-style 90-degree rear cover, verify your port direction and bracket clearance before ordering.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If gravity or air loss could cause the load to drift, install an external rod lock or a pilot-operated check valve to hold position. To add reed or electronic sensing, this -S magnet SKU is ready for CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X45SU FAQ
This double-acting cylinder delivers 100.5 N push and 86.4 N pull at 0.5 MPa, and 140.7 N push and 120.9 N pull at 0.7 MPa, with a theoretical maximum of 20.5 kgf at 1.0 MPa. It features a 1/8" air port, a Ø6 mm piston rod, and an M6x1.0 male rod thread.
The MIC16X45SU uses a needle-set variable air cushion at both ends to decelerate the piston smoothly at high speeds, reducing shock and noise. It includes a built-in piston magnet (-S) for direct mounting of CMSG, DMSG, or EMSG switches, and the stainless steel construction resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X45SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.