Airtac MIC Cushioned Mini Cylinder MIC16X50U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X50U is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 50mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X50U
Tame high-speed end-of-stroke impacts with the AirTAC MIC16X50U, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. It conforms to the ISO 6432 mounting interface for Ø16, dropping directly into standard mini brackets and clevises. This 50 mm stroke unit uses an M5×0.8 port and an M6x1.0 male rod thread.
At 0.5 MPa it pushes 100.5 N and pulls 86.4 N, peaking at a theoretical 20.5 kgf. That translates to a safe working load of about 60 N, or roughly 5.1 kg of vertical lift with a 2:1 margin. The defining feature over a bumper cylinder is the adjustable air cushion at both ends: a needle valve lets you dial in deceleration to protect the load and cut noise. This base SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC16X50U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X50U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X50U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X50U Is Used
Light Part Ejection
Ejects small plastic parts at high speed. The needle-set cushion absorbs the 100.5 N end impact, preventing premature wear on the ejector assembly.
Package Diverting
Diverts lightweight cartons on a conveyor. The stainless build handles mildly humid packing environments while the cushion softens the stroke.
Small Component Pressing
Presses delicate electronic connectors into place. The 5.1 kg vertical lift capacity and smooth deceleration protect fragile components from impact.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X50U the Right Cylinder?
For lighter duty, the MI16 bumper version offers similar thrust but lacks adjustable cushions; stepping up to the MIC20X50 raises 0.5 MPa push force to 157 N. Choose this Ø16 model for high-speed, low-mass moves where shock absorption matters. The U rear cover provides a 90-degree port orientation for tight layouts. Add an -S magnet variant if you need position sensing.
The adjustable cushion only decelerates the piston near stroke end; it is not a lock or brake. Because a plain cylinder drifts on air loss or when a valve centers, use an external rod lock or pilot-operated check valve to hold a vertical load safely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X50U FAQ
This double-acting cylinder has a 16 mm bore, 50 mm stroke, M5×0.8 port, and an M6x1.0 male rod thread. It pushes 100.5 N and pulls 86.4 N at 0.5 MPa. At 0.7 MPa it pushes 140.7 N and pulls 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for position sensing. The adjustable air cushion at both ends functions only to decelerate the load, not to hold it in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X50U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.