Airtac MIC Cushioned Mini Cylinder MIC16X75SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X75SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X75SCA
Dial in end-of-stroke deceleration with the AirTAC MIC16X75SCA, a round-body stainless steel mini cylinder built for double-acting service. Twin adjustable air cushions let you needle-set the exhaust bleed at both ends, smoothly soaking up kinetic energy at high speeds to protect your payload and cut workshop noise. The 16 mm bore develops 100.5 N of push force at 0.5 MPa, making it a solid fit for light-duty positioning.
The riveted stainless barrel and Ø6 mm rod shrug off mild washdown and corrosion, while the 75 mm stroke operates at 30-800 mm/s. Because this bore falls inside the Ø8-Ø25 range, it conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets. The CA rear pivot cover simplifies clevis mounting. With a safe working load around 60 N, it lifts about 5.1 kg vertically with a 2:1 margin. The M5×0.8 port and M6x1.0 male rod thread keep fittings compact.
Airtac MIC Cushioned Mini Cylinder MIC16X75SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X75SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X75SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X75SCA Is Used
Light-Duty Pick & Place
Ideal for moving small electronic components or plastic parts at speed, where the 60 N safe working load and adjustable cushion prevent harsh end-of-stroke impacts.
Film Feed Rollers
Handles 75 mm stroke actuation on packaging lines, using the needle-set cushion to stop the roller gently without tearing web materials.
Lab Sample Diverters
The stainless build resists mild cleaning agents, and the ISO 6432 CA pivot mount makes it easy to integrate into compact benchtop sorting gates.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X75SCA the Right Cylinder?
Choose this 16 mm bore when you need roughly 100 N of push at 0.5 MPa with smooth cushioned stops. If your payload is lighter and you can tolerate bumper impact, the smaller MI bumper mini cylinder saves space; if you need more muscle, stepping up to the Ø20 MIC bore adds 157 N of push force at the same pressure. The adjustable cushion shines here on high-speed strokes over 75 mm, preventing end-cap banging that would eventually damage the piston rod.
Remember that the air cushion only decelerates the load near the stroke end—it is not a lock or brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for vertical load holding. This SKU includes the -S piston magnet for CMSG, DMSG, or EMSG switches, and the CA back cover provides a rear pivot point for angular alignment.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X75SCA FAQ
This 16 mm bore double-acting cylinder pushes 100.5 N and pulls 86.4 N at 0.5 MPa. At 0.7 MPa, push is 140.7 N and pull is 120.9 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa. It uses an M5×0.8 port and a Ø6 mm piston rod with an M6x1.0 male thread.
Yes, the -S suffix means it has a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. The adjustable air cushion at both ends only decelerates the piston near stroke end to reduce shock; it does not lock or hold the load. You need an external rod lock or pilot check valve to prevent drifting on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.