Airtac MIC Cushioned Mini Cylinder MIC16X85SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC16X85SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø16mm bore and 85mm stroke, M5×0.8 air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ16 mm
- Stroke85 mm
- Port sizeM5×0.8
- Acting typeDouble acting + cushion
- Rod threadM6×1.0
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC16X85SCM
Delivering 140.7 N of push force at 0.7 MPa, this double-acting stainless steel round-body mini cylinder handles rapid 85 mm strokes with precision. The defining feature of the MIC series is the needle-adjustable air cushion at both ends, letting you dial in deceleration to absorb end-of-stroke shock at high speeds. This protects your payload and reduces noise far better than a fixed rubber bumper. The stainless barrel and rod offer mild corrosion resistance, making it suitable for light washdown environments.
Because it uses the ISO 6432 mounting interface, this Ø16 bore drops directly into standard mini-cylinder brackets and clevises. It features an M5×0.8 port, an M6x1.0 male rod thread, and a CM round rear cover for straightforward orientation. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position switches. For practical sizing, expect a safe working load of about 60 N, which means it lifts roughly 5.1 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC16X85SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC16X85SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 85 mm |
| Acting type | Double acting + cushion |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC16X85SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 16 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC16X85SCM Is Used
Light Part Ejection
Uses the 100.5 N push force at 0.5 MPa to kick small plastic parts out of a mold, relying on the adjustable cushion to soften the end stop during fast cycling.
Package Sorting Diverter
Swings lightweight cardboard cartons on a packing line where the 85 mm stroke and M5×0.8 port provide rapid, repeatable actuation without slamming.
Lab Sample Handling
Moves delicate test tubes or vials safely, where the stainless build resists mild cleaning chemicals and the cushion prevents sudden shocks from spilling liquids.
Is the Airtac MIC Cushioned Mini Cylinder MIC16X85SCM the Right Cylinder?
When sizing this bore, step down to the smaller MI series if your application only needs a fixed bumper, as the cushion mechanism starts at Ø16. If you need more power, stepping up to the Ø20 MIC bore increases the 0.5 MPa push force from 100.5 N to 157.0 N. The adjustable cushion proves essential when cycling at high speeds or moving heavier masses, preventing harsh impacts at the stroke ends.
Remember that the air cushion only decelerates the piston near the end of travel; it does not function as a lock or brake. If your system loses air, the piston will drift, so add an external rod lock or pilot-operated check valve to hold a suspended load. You can mount this unit using LB foot, FA flange, SDB pivot, or TC trunnion hardware to match your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC16X85SCM FAQ
This double-acting cylinder features an M5×0.8 port and generates 100.5 N push / 86.4 N pull at 0.5 MPa, and 140.7 N push / 120.9 N pull at 0.7 MPa. The theoretical maximum force is 20.5 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in magnet compatible with CMSG, DMSG, and EMSG switches. The adjustable air cushion at both ends uses a needle valve to tune deceleration, absorbing high-speed shock without acting as a physical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC16X85SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.