Airtac MIC Cushioned Mini Cylinder MIC20X10SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X10SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X10SU
High-speed automation gets quieter with the AirTAC MIC20X10SU, a round-body stainless steel mini cylinder built for double-acting service. Unlike standard bumper units, this model features an adjustable air cushion at both ends. You simply turn the cushion needle to soak up end-of-stroke shock, protecting the load and cutting noise. The stainless barrel and rod resist mild corrosion and washdown environments, while the U-style rear cover provides a 90-degree mounting orientation. It uses a 1/8" port and an M8x1.25 male rod thread.
Delivering 157 N of push force and 131.9 N of pull force at 0.5 MPa, this 20 mm bore unit handles short 10 mm strokes with precision. For practical sizing, it offers a safe working load of about 94 N, or roughly 8 kg of vertical lift with a 2:1 safety margin. Because it includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for position detection. It conforms to the ISO 6432 mounting interface for easy bracket integration.
Airtac MIC Cushioned Mini Cylinder MIC20X10SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X10SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X10SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X10SU Is Used
Short-Stroke Ejector
Uses the 10 mm stroke to knock parts off a fixture quickly. The adjustable air cushion absorbs the rapid end-of-stroke impact, protecting the 8 kg load.
High-Speed Diverter
Pushes lightweight packages at high cycle rates. The needle-set cushion slows the 157 N push force smoothly, reducing wear and mechanical noise.
Washdown Sealing Press
Compresses carton flaps in damp environments. The stainless steel round-body construction resists mild corrosion while the U cover handles side mounting.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X10SU the Right Cylinder?
When sizing this 20 mm bore, compare it directly against adjacent options. Stepping down to the 16 mm bore drops your 0.5 MPa push force to 100.5 N, while stepping up to the 25 mm bore increases it to 245.3 N. Choose this 20 mm unit when you need roughly 157 N of push within a compact ISO 6432 footprint. The adjustable cushion matters most if you drive heavy loads at high speeds up to 800 mm/s, as the needle decelerates the piston to prevent impact damage. Note that the cushion only decelerates; it does not lock the rod. If you need to hold a load vertically during air loss, add an external rod lock or pilot check valve. You can mount it via LB foot, FA flange, SDB pivot, or TC trunnion hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X10SU FAQ
This 20 mm bore cylinder uses a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, or 219.8 N push and 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end to reduce shock; it does not lock or hold the load. You need an external rod lock for position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X10SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.