Airtac MIC Cushioned Mini Cylinder MIC20X10U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X10U is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X10U
Designed for rapid, short-stroke actuation, this double-acting stainless steel round-body mini cylinder uses a needle-set variable air cushion at both ends to decelerate the load smoothly. The Ø20 mm bore, paired with a 10 mm stroke, generates 157 N of push force at 0.5 MPa. Its riveted stainless barrel and Ø8 mm rod resist mild corrosion, making it suitable for washdown environments. A 90-degree U rear cover provides flexible port and mounting orientation.
In practical terms, the unit yields a safe working load of roughly 94 N, capable of lifting about 8 kg vertically with a 2:1 safety margin. It uses a 1/8" port and an M8x1.25 male rod thread. Because this specific SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG sensors for position detection.
Airtac MIC Cushioned Mini Cylinder MIC20X10U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X10U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X10U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X10U Is Used
Part Ejection
Rapidly pushes light metal or plastic parts out of a machining area using its 157 N push force, relying on the adjustable cushion to stop the 10 mm stroke without harsh impacts.
Flap Folding
Actuates a short folding arm on a packaging line to tuck carton flaps, where the stainless build withstands occasional washdowns and the U cover eases port routing.
Small Part Sorting
Diverts small components on a conveyor at high speed, using the needle-set cushion to silently absorb the kinetic energy at the end of the 10 mm travel.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X10U the Right Cylinder?
When sizing this actuator, consider the 10 mm stroke limit against your travel requirements. If less force is needed, the smaller Ø16 bore provides 100.5 N of push at 0.5 MPa, though it lacks the cushion feature. For heavier loads, stepping up to the Ø25 bore offers 245.3 N. The adjustable cushion is essential when operating at high speeds up to 800 mm/s to absorb end-of-stroke shock and reduce noise.
Remember that the air cushion only decelerates the piston near the end of its travel; it does not function as a brake or lock. If your application must hold a vertical load during a loss of air pressure, install an external rod lock or a pilot-operated check valve. For mounting, you can utilize LB foot, FA flange, SDB pivot, or TC trunnion brackets alongside the standard ISO 6432 mini-cylinder interface.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X10U FAQ
This Ø20 mm bore cylinder features a 1/8" port and an M8x1.25 male rod thread. At 0.5 MPa it provides 157 N of push force and 131.9 N of pull force. At 0.7 MPa, the push force is 219.8 N and the pull force is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant to enable magnetic sensing. The cylinder does feature a stainless steel build and an adjustable air cushion at both ends to decelerate loads smoothly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X10U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.