Airtac MIC Cushioned Mini Cylinder MIC20X125CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X125CM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 125mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke125 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X125CM
Tame high-speed end-of-stroke shock with the AirTAC MIC20X125CM, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. A needle-set variable air cushion at both ends decelerates the load smoothly, cutting noise and impact compared to a fixed bumper. It conforms to the ISO 6432 mounting interface for Ø20 bores, dropping cleanly into standard mini brackets and clevises.
At 0.5 MPa this 20 mm bore generates 157 N of push force and 131.9 N of pull, translating to a safe working load of roughly 94 N or a vertical lift of about 8 kg with a 2:1 margin. The 125 mm stroke uses an 8 mm piston rod, an M8x1.25 male thread, and a 1/8" port. The CM round end rear cover suits compact foot or flange layouts. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG switches.
Airtac MIC Cushioned Mini Cylinder MIC20X125CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X125CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 125 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X125CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X125CM Is Used
Package Diverting
Uses the 157 N push force at 0.5 MPa to nudge lightweight cartons off a main belt, relying on the adjustable air cushion to stop the 125 mm stroke quietly at high speed.
Small Part Ejection
Ejects molded components from a press area, where the needle-set cushion absorbs the end impact to protect delicate product finishes during rapid cycling.
Light Assembly Pressing
Applies an 8 kg vertical clamping force to seat small bearings, with the stainless build resisting coolant mist and the CM rear cover fitting tight machine frames.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X125CM the Right Cylinder?
For lighter duties the Ø16 bore pushes 100.5 N at 0.5 MPa, while the larger Ø25 bore steps up to 245.3 N if you need more muscle. Choose this Ø20 model for high-speed cycles where the adjustable cushion is essential to protect the payload. If the air supply drops, the cushion only decelerates near the stroke end and does not act as a brake; the piston will drift, so fit an external rod lock or pilot check valve to hold a suspended load.
Mounting options include LB foot, FA flange, SDB pivot-block and TC trunnion brackets. Because this exact code has no -S suffix, magnetic position sensing is unavailable on this unit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X125CM FAQ
This double-acting cylinder uses a 1/8" port and an 8 mm rod. It pushes 157 N and pulls 131.9 N at 0.5 MPa. At 0.7 MPa it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so CMSG, DMSG and EMSG switches will not function. You must order the -S variant to enable magnetic sensing. The adjustable air cushion only decelerates the load and does not lock the rod in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X125CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.