Airtac MIC Cushioned Mini Cylinder MIC20X130SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X130SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 130mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke130 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X130SU
Tame high-speed end-of-stroke shock with the AirTAC MIC20X130SU, a double-acting round-body mini cylinder built around a 20 mm bore and 130 mm stroke. It uses a needle-set variable air cushion at both ends to decelerate the load smoothly, protecting your machinery and reducing noise far better than a fixed rubber bumper. The stainless-steel barrel and piston rod supply mild corrosion resistance for washdown or humid settings, while the U-style rear cover provides a 90-degree mounting orientation.
Delivering 157 N of push and 131.9 N of pull at 0.5 MPa, this ISO 6432 mounting-interface cylinder fits standard mini brackets and clevises. The -S suffix indicates a built-in piston magnet for position sensing using CMSG, DMSG, or EMSG switches. For sizing, a safe working load is roughly 94 N, meaning it lifts about 8 kg vertically with a 2:1 safety margin. It features an M8x1.25 male rod thread and a 1/8 inch air port.
Airtac MIC Cushioned Mini Cylinder MIC20X130SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X130SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 130 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X130SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X130SU Is Used
Package Diverting
At 30-800 mm/s, this cylinder pushes lightweight parcels off a high-speed belt, relying on the dual adjustable air cushions to prevent harsh impacts that could damage packaging.
Vertical Lift Stops
Lifting roughly 8 kg with a 2:1 margin, it raises small totes or bins into position, using the needle-set cushion to bring the load to a gentle stop at the top of the 130 mm stroke.
Lab Sample Handling
The stainless steel construction resists mild corrosion in humid laboratory environments, while the 157 N push force reliably moves sample trays without sudden jolts.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X130SU the Right Cylinder?
If you need less force, dropping down to the MIC16 lowers the push output to 100.5 N at 0.5 MPa; stepping up to the MIC25 raises it to 245.3 N. Choose this 20 mm bore when moving light payloads at high speeds where the adjustable air cushion can effectively bleed off kinetic energy. The cushion only decelerates the piston near the stroke end and acts purely as a shock absorber. It does not function as a lock or brake. If your application must hold a load vertically during a complete air loss or when a valve is centered, you must add an external rod lock or a pilot-operated check valve, because the piston will drift. Mount this unit using standard ISO 6432 hardware, and leverage the internal magnet for CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X130SU FAQ
This 20 mm bore cylinder pushes with 157 N and pulls with 131.9 N at 0.5 MPa. At 0.7 MPa, it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa. It features a 1/8 inch air port and an M8x1.25 male rod thread.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The variable air cushion at both ends only decelerates the piston near the end of the stroke to reduce shock; it is not a brake. The cylinder will not hold a load on air loss, so use an external rod lock or pilot check valve for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X130SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.