Airtac MIC Cushioned Mini Cylinder MIC20X150CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X150CA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X150CA
Built with a stainless steel round barrel and an 8 mm piston rod, this double-acting mini cylinder handles mild washdown while pushing 157 N and pulling 131.9 N at 0.5 MPa. It uses a 1/8 inch port and an M8x1.25 male rod thread. The CA rear pivot cover simplifies clevis mounting for angular movement.
Twin adjustable air cushions distinguish this unit from a fixed bumper model, letting you needle-set the end-of-stroke deceleration to silence high-speed impacts. With a 157 N push force at 0.5 MPa, it yields a safe working load of roughly 94 N, lifting about 8 kg vertically with a 2:1 margin. The 150 mm stroke drops into standard ISO 6432 mini-cylinder brackets. This SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC20X150CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X150CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X150CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X150CA Is Used
Diverter Gate Actuation
Snaps a sorting flap at speed on a packaging line, relying on the adjustable cushions to soften the 150 mm stroke end and protect the 8 kg payload.
Light Press Assembly
Drives a small bearing into a housing with 157 N of push force, using the needle-set deceleration to prevent marking the part on impact.
Pivot Arm Transfer
Swings a lightweight transfer arm via the CA clevis mount, moving components between stations without jarring the conveyor framework.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X150CA the Right Cylinder?
For lighter duty, the Ø16 bore pushes 100.5 N at 0.5 MPa; for heavier loads, the Ø25 bore pushes 245.3 N. Choose this Ø20 body when your payload sits near its 94 N safe working load and you need the needle-set cushions to tame fast 30-800 mm/s cycling. The cushions only decelerate near the stroke end and do not lock the rod. To prevent drift on air loss, fit an external rod lock or pilot check valve. Add the -S magnet variant if you require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X150CA FAQ
This double-acting cylinder uses a 1/8 inch port and an M8x1.25 male rod thread. It pushes 157 N and pulls 131.9 N at 0.5 MPa. At 0.7 MPa, push is 219.8 N and pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU lacks a piston magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. The stainless build resists mild corrosion, and the adjustable air cushions decelerate the load near stroke end but do not function as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X150CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.