Airtac MIC Cushioned Mini Cylinder MIC20X150U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X150U is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X150U
Delivering 157 N of push force at 0.5 MPa, the AirTAC MIC20X150U is a double-acting, round-body stainless-steel mini cylinder built for a 150 mm stroke. A needle-set variable air cushion at both ends soaks up high-speed end-of-travel shock, protecting your payload while cutting noise. The stainless barrel and rod shrug off mild corrosion and washdown environments. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches.
With a 1/8" port and an M8x1.25 male rod thread, this unit conforms to the ISO 6432 mounting interface for straightforward bracket and clevis integration. The rear U cover provides a 90-degree port orientation for tidy tubing in tight spaces. Based on the 0.5 MPa push rating, it handles a safe working load of roughly 94 N, lifting about 8 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC20X150U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X150U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X150U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X150U Is Used
Light Diverter Gate
Cycles small cardboard cartons at high speed on a packaging line, relying on the adjustable air cushion to prevent harsh slamming over the 150 mm travel.
Component Ejector
Pushes lightweight machined parts out of a fixture, using the 157 N thrust to clear the tool while the stainless body resists cutting fluid mist.
Vertical Lift Stop
Raises an 8 kg tote to a transfer height, benefiting from the smooth needle-set deceleration to avoid jarring the contents at the top of the stroke.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X150U the Right Cylinder?
When sizing this 20 mm bore, stepping down to the 16 mm version drops the 0.5 MPa push force to 100.5 N, while moving up to the 25 mm bore raises it to 245.3 N. Choose this 150 mm stroke model for mid-range travel where the adjustable air cushion proves essential—specifically at high cycling speeds between 30 and 800 mm/s where a fixed bumper would transmit damaging shock. The cushion needle only decelerates the piston near stroke end; it does not function as a brake. If your application must hold a load vertically during air loss, install an external rod lock or pilot-operated check valve.
The U-style rear cover simplifies 90-degree mounting. Since this specific SKU is non-magnetic, it cannot support sensing switches; you must select an -S variant to use CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X150U FAQ
This 20 mm bore cylinder uses a 1/8" port. At 0.5 MPa it pushes with 157 N and pulls with 131.9 N. At 0.7 MPa the push is 219.8 N and the pull is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S magnet version for sensing. The stainless build and adjustable air cushion function identically across both variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X150U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.