Airtac MIC Cushioned Mini Cylinder MIC20X15CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X15CA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X15CA
Dial in end-of-stroke deceleration with the AirTAC MIC20X15CA, a double-acting round-body mini cylinder built for high-speed actuation. Its stainless-steel barrel and Ø8 piston rod shrug off mild corrosion and washdown environments. Equipped with a needle-set variable air cushion at both ends, it absorbs shock to protect your payload far better than a fixed bumper. This Ø20 bore pushes 157 N and pulls 131.9 N at 0.5 MPa, translating to a safe working load of roughly 94 N or a 2:1 vertical lift capacity of about 8 kg.
This specific SKU features a CA rear pivot cover and uses a 1/8" port with an M8x1.25 male rod thread. It conforms to ISO 6432 mounting dimensions, dropping seamlessly into standard mini-cylinder brackets and clevises. Note that because it lacks the -S suffix, this cylinder cannot accept CMSG, DMSG, or EMSG magnetic sensors.
Airtac MIC Cushioned Mini Cylinder MIC20X15CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X15CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 15 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X15CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X15CA Is Used
Package Diverting
Handles rapid 15 mm sorting strokes on conveyor lines; the dual air cushions silently absorb the shock of redirecting lightweight goods at high cycle rates.
Small Part Clamping
Provides 157 N of push at 0.5 MPa to secure small components during machining, with the stainless build resisting cutting fluid splash.
Vertical Lift Stops
Lifts roughly 8 kg vertically with a 2:1 safety margin, using the adjustable end cushion to prevent the load from slamming down at the bottom of the stroke.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X15CA the Right Cylinder?
When sizing this 15 mm stroke unit, consider the force boundaries. If you need less push, stepping down is not an option within the MIC cushioned range since Ø16 is the smallest available; the smaller MI series only offers a fixed bumper. If your payload requires more thrust, move up to the Ø25 MIC bore, which provides 245.3 N of push force at 0.5 MPa compared to this bore's 157 N. The adjustable cushion is essential when cycling at high speeds or moving heavy loads, as it prevents harsh impacts. Remember that the cushion only decelerates the piston near the stroke end; it does not function as a brake. If your application must hold position during air loss, install an external rod lock or pilot check valve. Use the CA pivot mount for articulating motion, and switch to the -S variant if you require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X15CA FAQ
This double-acting cylinder delivers 157 N push and 131.9 N pull at 0.5 MPa, and 219.8 N push with 184.7 N pull at 0.7 MPa. Its theoretical maximum force is 32 kgf at 1.0 MPa. The air port size is 1/8".
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant of the MIC20 cylinder to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X15CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.