Airtac MIC Cushioned Mini Cylinder MIC20X160CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X160CA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X160CA
High-speed actuation meets smooth deceleration in this double-acting stainless steel round-body mini cylinder. Tunable air cushions at both ends absorb end-of-stroke shock, protecting your payload far better than a fixed bumper. The Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread, generating 157 N of push force at 0.5 MPa.
Built with a corrosion-resistant stainless barrel and rod, it handles mild washdown environments with ease. It conforms to ISO 6432 mounting dimensions for straightforward bracket integration. Without the -S magnet option, this specific SKU cannot host CMSG, DMSG, or EMSG sensors. For vertical loads, expect a safe working lift of about 8 kg with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC20X160CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X160CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X160CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X160CA Is Used
Package Diverting
Pushes lightweight cartons at high speed across transfer belts, relying on the adjustable cushion to stop the 160 mm stroke without slamming.
Flap Folding
Drives folding arms on packaging lines where the 157 N push force handles cardstock while the cushion protects delicate mechanisms.
Small Part Ejection
Ejects molded parts from tight spaces; the stainless build resists shop moisture and the CA pivot allows angled mounting.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X160CA the Right Cylinder?
If you need less force, the smaller MIC16 bore provides 100.5 N push at 0.5 MPa, while stepping up to the MIC25 bore yields 245.3 N. Choose this Ø20 model when moving moderate loads at high speeds where the adjustable needle cushion is essential to prevent impact damage. The 160 mm stroke falls well within the 500 mm standard maximum.
The CA rear pivot cover is ideal for clevis mounting. Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If you must prevent drift on air loss, install an external rod lock or pilot check valve. Because this SKU lacks a magnet, position sensing is unavailable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X160CA FAQ
This double-acting cylinder uses a 1/8" port and generates 157 N push / 131.9 N pull at 0.5 MPa, and 219.8 N push / 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You would need the -S variant for sensing. It features a stainless steel build and adjustable air cushions at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X160CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.