Airtac MIC Cushioned Mini Cylinder MIC20X160SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X160SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke160 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X160SCA
Dial in end-of-stroke deceleration with the AirTAC MIC20X160SCA, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. A needle-set variable air cushion at both ends absorbs high-speed shock, protecting your payload far better than a fixed bumper. The built-in -S piston magnet enables CMSG, DMSG, or EMSG position sensing, and the CA rear cover provides a robust pivot mount.
Delivering 157 N of push force and 131.9 N of pull force at 0.5 MPa, this Ø20 mm bore unit handles a safe working load of roughly 94 N. That translates to lifting about 8 kg vertically with a 2:1 safety margin. It uses a 1/8" port and an M8x1.25 male rod thread, conforming to the ISO 6432 mounting interface for easy bracket interchange. The 160 mm stroke operates at speeds from 30 to 800 mm/s.
Airtac MIC Cushioned Mini Cylinder MIC20X160SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X160SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 160 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X160SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X160SCA Is Used
Light Package Diverting
Ideal for rapidly pushing small cartons off a belt at 800 mm/s, using the adjustable cushion to stop the 160 mm stroke smoothly without jarring the mechanism.
Small Component Seating
Provides a reliable 94 N safe working load to press lightweight bushings or pins into housings, with the CA pivot absorbing minor side-play.
Flap Folding
Handles high-speed box flap folding where the stainless rod resists mild moisture and the needle-set cushion prevents crushing the cardboard at stroke end.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X160SCA the Right Cylinder?
When sizing this 157 N push unit, consider the adjacent bores in the MIC family. Dropping down to the Ø16 bore reduces thrust to 100.5 N, while stepping up to the Ø25 bore increases it to 245.3 N at 0.5 MPa. Choose this Ø20 model for light-to-medium payloads where the adjustable cushion is critical to prevent impact at high cycling speeds. The CA clevis back cover suits pivoting loads.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If your system loses air, the piston will drift, so fit an external rod lock or pilot-operated check valve for position holding. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X160SCA FAQ
This double-acting cylinder uses a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No. The adjustable air cushion only decelerates the piston near the end of the stroke and is not a brake. If air pressure drops, the piston will drift. For vertical loads, install an external rod lock or pilot check valve. The -S magnet allows CMSG/DMSG/EMSG sensors for position confirmation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X160SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.