Airtac MIC Cushioned Mini Cylinder MIC20X172SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X172SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 172mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke172 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X172SU
Built for rapid cycling, the AirTAC MIC20X172SU relies on a needle-set variable air cushion at both ends to absorb end-of-stroke shock, outperforming fixed bumper mini cylinders. This double-acting, round-body stainless steel actuator carries a 172 mm stroke and uses a 1/8 inch port. Its U-style 90-degree rear cover simplifies port and mounting orientation in tight spaces.
Delivering 157 N of push force and 131.9 N of pull force at 0.5 MPa, it suits light-to-medium duty tasks. The stainless barrel and rod resist mild corrosion and washdown environments. Because the bore is Ø20, it conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets. This specific configuration includes a piston magnet (-S) for CMSG, DMSG or EMSG sensor integration. Based on the 0.5 MPa push figure, it handles a safe working load of roughly 94 N, lifting about 8 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC20X172SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X172SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 172 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X172SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×172 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X172SU Is Used
Light Package Diverting
Ideal for swiftly routing small parcels on a conveyor. The adjustable air cushion halts the 172 mm stroke gently, preventing package damage even at high cycle rates.
Small Component Ejection
Ejects lightweight machined parts from a fixture. The 157 N push force clears debris or parts reliably, while the stainless build handles light coolant splash.
Bin Lid Actuation
Opens and closes access hatches on storage bins. The U-style 90-degree cover aids mounting, and the cushion prevents the lid from slamming shut abruptly.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X172SU the Right Cylinder?
When sizing this actuator, step down to the Ø16 bore for lighter loads, but note its lower 100.5 N push force at 0.5 MPa. If your application requires more thrust, stepping up to the Ø25 bore provides 245.3 N at 0.5 MPa. The adjustable air cushion on the MIC20X172SU is essential when operating at high speeds or moving heavier loads, as it decelerates the piston smoothly without harsh impacts.
Remember that the air cushion only decelerates near the stroke end; it does not function as a lock or brake. If air pressure drops, the piston will drift, so install an external rod lock or pilot-operated check valve for secure load holding. This SKU includes the -S magnet for position sensing, and you can pair it with LB foot, FA flange, SDB pivot, or TC trunnion mounts to fit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X172SU FAQ
This double-acting cylinder features a 1/8 inch port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The variable air cushion at both ends uses a needle valve to tune deceleration, reducing shock at high speeds. It only decelerates the load and does not lock or hold position on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X172SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.