Airtac MIC Cushioned Mini Cylinder MIC20X200CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X200CA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X200CA
Tame high-speed end-of-stroke impacts with the AirTAC MIC20X200CA, a 20 mm bore double-acting mini cylinder featuring needle-adjustable air cushions at both ends. Instead of a fixed bumper, you dial in the deceleration to protect payloads and cut noise. The stainless-steel round barrel and rod shrug off mild corrosion and washdown environments. Built to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises.
At 0.5 MPa this bore pushes 157 N and pulls 131.9 N, yielding a safe working load of roughly 94 N or about 8 kg of vertical lift with a 2:1 margin. The 200 mm stroke moves through a 1/8" port on an M8x1.25 male rod thread. This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches. The CA rear cover provides a pivot clevis mount for articulating rod-end loads.
Airtac MIC Cushioned Mini Cylinder MIC20X200CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X200CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X200CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X200CA Is Used
Package Diverter
Snaps a 200 mm diverter arm across a belt at speed. The adjustable air cushion softens the impact at the end of the stroke, protecting the package and the pivot bracket.
Light Press Assembly
Pushes a bearing into a housing with 157 N of force at 0.5 MPa. The needle-set deceleration prevents the 8 kg press load from slamming the tooling.
Bin Gate Actuator
Opens and closes a light hopper gate. The stainless construction handles mildly humid environments, while the CA pivot clevis accommodates the gate swing.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X200CA the Right Cylinder?
If 157 N of push at 0.5 MPa is too much, dropping down is tricky because the smaller Ø16 bore in this family is an MI bumper-only version with 100.5 N push. Stepping up to the Ø25 MIC gives you 245.3 N. The adjustable cushion matters most when driving the 200 mm stroke at high speeds up to 800 mm/s, letting you tune the deceleration to stop heavy loads smoothly.
Remember that the air cushion only decelerates near the stroke end, it does not lock or hold the load. If air pressure drops, the piston drifts. For vertical or suspended loads that must hold position on air loss, add an external rod lock or pilot-operated check valve. Because this base SKU has no magnet, order an -S variant if you need CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X200CA FAQ
This 20 mm bore double-acting cylinder uses a 1/8" port and an M8x1.25 male rod thread. It pushes 157 N and pulls 131.9 N at 0.5 MPa. At 0.7 MPa it pushes 219.8 N and pulls 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must order the -S variant for sensing. The adjustable air cushion only decelerates the load near the stroke end and does not act as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X200CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.