Airtac MIC Cushioned Mini Cylinder MIC20X200SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X200SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X200SCM
Dial in end-of-stroke deceleration with the AirTAC MIC20X200SCM, a 20 mm bore double-acting round-body mini cylinder featuring an adjustable air cushion at both ends. Instead of a fixed bumper, a precision needle valve lets you tune the exhaust bleed to perfectly absorb high-speed shock, protecting your payload and cutting workshop noise. The stainless-steel barrel and Ø8 mm piston rod supply reliable mild corrosion and washdown resistance.
Operating at 0.5 MPa, this ISO 6432 mounting-interface unit delivers 157 N of push force and 131.9 N of pull force, peaking at a theoretical 32 kgf at 1.0 MPa. For practical sizing, it yields a safe working load of roughly 94 N and can vertically lift about 8 kg with a 2:1 safety margin. The 200 mm stroke unit uses a 1/8" port, features an M8x1.25 male rod thread, and includes a CM round rear cover for straightforward port orientation. Because the SKU carries the -S suffix, a built-in piston magnet enables position sensing using CMSG, DMSG, or EMSG switches.
Airtac MIC Cushioned Mini Cylinder MIC20X200SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X200SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X200SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X200SCM Is Used
Package Diverting
At 800 mm/s, the 157 N push force cleanly kicks light cartons off a belt line while the tuned cushion prevents jarring stops over the 200 mm travel.
Filler Head Positioning
Lifts roughly 8 kg of vertical tooling into place, using the M8x1.25 rod thread and washdown-resistant stainless body to handle minor washdown splashes.
Small Parts Ejection
Uses the 131.9 N pull force to retract an ejector pin rapidly, relying on the rear CM cover and adjustable cushion to absorb the snap-back shock.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X200SCM the Right Cylinder?
When sizing this 157 N push class actuator, evaluate your kinetic energy. If your load is light, dropping down to an MIC16 bore provides 100.5 N of push force at 0.5 MPa, whereas moving heavy fixtures up to an MIC25 bore yields 245.3 N. The adjustable cushion shines in the 30-800 mm/s speed range, allowing you to set the exact deceleration curve for a 200 mm travel without metal-on-metal slamming.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If the air supply drops or the valve centers, the rod will drift, so incorporate an external rod lock or pilot-operated check valve for suspended loads. For physical mounting, the ISO 6432 dimensions accept standard LB foot, FA flange, SDB pivot, or TC trunnion brackets, and the -S magnet ensures your CMSG/DMSG/EMSG sensors will track the piston perfectly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X200SCM FAQ
This 20 mm bore cylinder uses a 1/8" air port and an Ø8 mm piston rod. At 0.5 MPa it provides 157 N push and 131.9 N pull force; at 0.7 MPa it provides 219.8 N push and 184.7 N pull. The theoretical maximum force is 32 kgf at 1.0 MPa.
It features a variable air cushion at both ends that uses a needle to bleed exhaust and decelerate the load before the stroke end. Because this model includes the -S magnet, you can mount CMSG, DMSG, or EMSG switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X200SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.