Airtac MIC Cushioned Mini Cylinder MIC20X20SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X20SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X20SU
Handling short 20 mm strokes with authority, this AirTAC round-body mini cylinder brings variable air cushioning to both stroke ends. The stainless steel barrel and rod shrug off mild washdown environments while delivering 157 N of push force at 0.5 MPa. A 1/8 inch port feeds the Ø8 mm piston rod, and the built-in magnet (-S) supports CMSG, DMSG, and EMSG position switches.
Because the needle-set cushion actively decelerates the load near the end of travel, it runs quieter than a fixed bumper. Based on the 0.5 MPa push rating, you get a safe working load of roughly 94 N, which means it lifts about 8 kg vertically with a 2:1 safety margin. The U-style 90-degree rear cover simplifies port orientation in tight assemblies.
Airtac MIC Cushioned Mini Cylinder MIC20X20SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X20SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 20 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X20SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X20SU Is Used
Small Parts Ejection
Shoots light plastic or metal parts out of a machining center at speed, relying on the dual air cushions to prevent harsh slamming during rapid 20 mm strokes.
Flap Folding
Folds carton flaps on a packaging line where the 94 N safe working load is plenty, while the stainless build resists incidental moisture.
Pick-and-Place Diverter
Acts as a short-stroke diverter for small electronic components, using the integrated magnet to trigger CMSG sensors for precise position confirmation.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X20SU the Right Cylinder?
If 157 N of push is excessive for a delicate task, dropping down to the Ø16 bore yields 100.5 N; conversely, stepping up to the Ø25 bore provides 245.3 N when this 20 mm unit stalls under load. The adjustable cushion shines when cycling at high speeds or moving heavier masses, as it prevents harsh end-of-stroke impacts. Remember that the cushion only decelerates the piston—it is not a brake. If your system loses air, the rod will drift, so fit an external rod lock or pilot check valve to suspend loads safely. The -S magnet enables electronic or reed sensors, and you can mount via LB foot, FA flange, or TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X20SU FAQ
This double-acting cylinder uses a 1/8 inch port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No. The -S denotes a built-in piston magnet for CMSG, DMSG, or EMSG sensors, and the needle-set air cushion only decelerates the piston near stroke end to reduce shock. It does not lock or hold position; you need an external rod lock or pilot check valve to prevent drifting on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X20SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.