Airtac MIC Cushioned Mini Cylinder MIC20X210SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X210SU is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 210mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke210 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X210SU
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles 210 mm strokes with precision. The Ø20 mm bore features a 1/8 inch port and an M8x1.25 male rod thread. A built-in piston magnet (-S) enables direct mounting of CMSG, DMSG, or EMSG switches for position sensing.
High-speed actuation is tamed by a variable air cushion at both ends, letting you needle-set the deceleration to protect payloads and reduce noise. The stainless barrel and rod resist mild corrosion and washdown environments. This unit drops into standard brackets via its ISO 6432 mounting interface and includes a U-style 90-degree rear cover. For lifting tasks, expect a safe vertical lift of about 8 kg with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC20X210SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X210SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 210 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X210SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X210SU Is Used
Package Diverting
Pushes lightweight cartons at high speed across a sorting line, relying on the adjustable air cushion to prevent harsh end-of-stroke slamming.
Film Sealing Press
Provides a steady 157 N push at 0.5 MPa to close sealing jaws, while the stainless build handles occasional washdowns.
Small Part Elevation
Lifts approximately 8 kg tote components vertically between conveyor tiers, using the U-style rear cover for stable pivot mounting.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X210SU the Right Cylinder?
When sizing this 210 mm stroke unit, dropping down to a MIC16X210 lowers the push force to 100.5 N at 0.5 MPa, while stepping up to a MIC25X210 raises it to 245.3 N. Choose this Ø20 bore when moving roughly 8 kg vertically or applying a 94 N working load. The adjustable cushions are essential if you cycle at high speeds and need to smooth out the end-of-stroke impact.
Remember that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops, the rod will drift, so fit an external rod lock or pilot check valve for suspended loads. The -S magnet allows sensor tracking, and you can adapt the mounting using LB foot, FA flange, or TC trunnion accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X210SU FAQ
This double-acting cylinder uses a 1/8 inch port. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
The adjustable air cushion only decelerates the piston near the stroke end and does not act as a brake, so the load will drift if air is lost. The -S suffix denotes a built-in magnet for CMSG, DMSG, or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X210SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.