Airtac MIC Cushioned Mini Cylinder MIC20X600SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X600SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X600SCA
Handling long-reach linear tasks, this stainless-steel round-body mini cylinder delivers 157 N of push force at 0.5 MPa. It is a double-acting actuator featuring an adjustable air cushion at both ends, allowing you to needle-set the deceleration to absorb high-speed shock and reduce noise. The Ø20 mm bore uses a 1/8" port and an M8x1.25 male rod thread. Because the 600 mm stroke exceeds the 500 mm standard maximum, this unit is supplied as a non-standard, made-to-order configuration.
The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position switches. It drops into standard mini-cylinder brackets via the ISO 6432 mounting interface. For vertical lifting, the 157 N output yields a safe working load of roughly 94 N, meaning it lifts about 8 kg with a 2:1 safety margin. The CA rear pivot cover simplifies clevis mounting, while the stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MIC Cushioned Mini Cylinder MIC20X600SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X600SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X600SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X600SCA Is Used
Long-Reach Parts Ejection
Uses the full 600 mm stroke to push finished parts clear of a machine bed. The needle-set air cushion decelerates the 8 kg load smoothly at high speed, preventing impact damage.
High-Level Package Divert
Actuates a pivoting diverter arm on a conveyor via the CA clevis mount. The ISO 6432 dimensions ensure easy bracket replacement in tight logistics spaces.
Washdown Sample Handling
Moves test trays in a damp environment. The stainless-steel barrel and rod resist mild corrosion, while the -S magnet allows electronic sensors to confirm stroke ends.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X600SCA the Right Cylinder?
When sizing this actuator, consider both force and speed. If you need less push, the smaller Ø16 bore provides 100.5 N at 0.5 MPa but lacks the adjustable cushion. If your load is heavier, stepping up to the Ø25 bore yields 245.3 N. The adjustable air cushion is essential for this 600 mm stroke at high cycling speeds, as it prevents harsh end-of-stroke impacts. Note that the cushion only decelerates the piston; it does not lock the load. If air pressure drops, the piston will drift, so fit an external rod lock or pilot check valve for holding. The -S magnet enables sensor tracking, and the CA back cover provides a rear pivot point.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X600SCA FAQ
This double-acting cylinder has a 1/8" port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, or 219.8 N push and 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa. The 600 mm stroke is a non-standard, made-to-order length exceeding the 500 mm standard maximum.
No, the adjustable air cushion only decelerates the piston near the stroke end to reduce shock; it is not a brake. On air loss, the piston will drift, so you need an external rod lock or pilot check valve to hold a load. The -S magnet allows CMSG, DMSG, and EMSG switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X600SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.