Airtac MIC Cushioned Mini Cylinder MIC20X60CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X60CM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X60CM
Dial in end-of-stroke deceleration with the AirTAC MIC20X60CM, a double-acting round-body mini cylinder built for high-speed actuation. A variable air cushion at both ends lets you turn a needle valve to absorb shock, protecting your payload and cutting noise far better than a fixed bumper. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. Conforming to the ISO 6432 mounting interface for Ø20 bores, it drops directly into standard mini brackets and clevises. This CM round-end version features a 60 mm stroke, an M8x1.25 male rod thread, and a 1/8" port.
In the 20 mm force class, this actuator generates 157 N of push and 131.9 N of pull at 0.5 MPa, peaking at a theoretical 32 kgf at 1.0 MPa. Translating that to real-world lifting, it handles a safe working load of roughly 94 N, lifting about 8 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG position sensors.
Airtac MIC Cushioned Mini Cylinder MIC20X60CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X60CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X60CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X60CM Is Used
Package Diverting
Ideal for routing small cartons at high speed, where the adjustable air cushion gently stops the 60 mm stroke to prevent crushing lightweight packaging.
Small Part Ejection
Provides reliable push force for ejecting machined components, using the 157 N thrust to clear the workspace without slamming into the end cap.
Lab Automation
Handles delicate sample trays in washdown-prone lab settings, benefiting from the stainless construction and smooth deceleration at cycle endpoints.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X60CM the Right Cylinder?
When sizing this 20 mm bore, stepping down to the 16 mm variant drops your 0.5 MPa push force to 100.5 N, while moving up to the 25 mm bore raises it to 245.3 N. Choose the MIC20X60CM when cycle speeds demand the adjustable air cushion to prevent harsh impacts. Remember that the cushion only decelerates the piston near stroke end; it does not function as a lock or brake. If your application must hold a load vertically during air loss, install an external rod lock or pilot-operated check valve. Mount this CM round-end cylinder using compatible front and rear accessories, and select the -S magnet version if you require sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X60CM FAQ
This double-acting cylinder features a 1/8" port and an 8 mm rod. It delivers 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for magnetic sensing. The adjustable air cushion at both ends functions solely to decelerate the load, not to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X60CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.