Airtac MIC Cushioned Mini Cylinder MIC20X60SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X60SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X60SCM
High-speed actuation demands precise end-of-stroke control, which the AirTAC MIC20X60SCM delivers through needle-set variable air cushions at both ends. This double-acting, round-body stainless steel mini cylinder provides a push force of 157 N and a pull force of 131.9 N at 0.5 MPa, dropping directly into ISO 6432 standard mini-cylinder mounting brackets and clevises.
The stainless barrel and piston rod resist mild corrosion and washdown environments. Equipped with a built-in piston magnet (-S), it supports CMSG, DMSG, and EMSG position switches. With a practical safe working load of roughly 94 N, it lifts about 8 kg vertically with a 2:1 safety margin. The CM round rear cover offers a clean back-end profile, and the 1/8" port ensures rapid airflow for its 30-800 mm/s speed range.
Airtac MIC Cushioned Mini Cylinder MIC20X60SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X60SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X60SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X60SCM Is Used
Light Package Diverting
Routes small cartons at high speed on a sorting line where the adjustable air cushion prevents harsh slams that could scuff packaging.
Small Component Ejection
Pushes machined parts out of a lathe chuck, using the 157 N push force to clear the workspace without marring the metal surface.
Film Feed Tensioning
Handles rapid stroke movements on a wrapping machine, relying on the stainless build to resist humidity and the cushion to stabilize the load.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X60SCM the Right Cylinder?
When sizing this 20 mm bore, stepping down to the MIC16 drops the 0.5 MPa push force to 100.5 N, while moving up to the MIC25 raises it to 245.3 N. Choose this 60 mm stroke model when cycle speeds are high enough that impact shock would damage a standard bumper cylinder. The adjustable cushion needle lets you tune the deceleration to protect the payload.
Remember that the air cushion only decelerates the piston near the stroke end; it is not a brake. If power drops, the piston drifts, so fit an external rod lock or pilot-operated check valve for load holding. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X60SCM FAQ
This double-acting cylinder features a 1/8" port and an M8x1.25 male rod thread. It generates a push force of 157 N and a pull force of 131.9 N at 0.5 MPa. At 0.7 MPa, the push force is 219.8 N and the pull force is 184.7 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG electronic or reed switches directly to the body. The variable air cushion at both ends uses a needle valve to trap exhaust air, decelerating the piston smoothly at high speeds to reduce shock and noise.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X60SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.