Airtac MIC Cushioned Mini Cylinder MIC20X700SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X700SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 700mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke700 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X700SCM
Handling mid-range actuation tasks, the AirTAC MIC20X700SCM is a double-acting round-body mini cylinder built from stainless steel for reliable mild corrosion resistance. It features a variable air cushion at both ends, allowing you to needle-set the deceleration to absorb end-of-stroke shock at high speeds. This 20 mm bore unit pushes 157 N and pulls 131.9 N at 0.5 MPa, yielding a safe working load of roughly 94 N or a vertical lift of about 8 kg with a 2:1 margin.
This specific SKU carries a 700 mm stroke, making it a non-standard, made-to-order length that exceeds the 500 mm standard maximum for this bore. It includes a built-in piston magnet (-S) for CMSG, DMSG, or EMSG switches, and uses a CM round rear cover. The 1/8" port and M8x1.25 male rod thread conform to the ISO 6432 mounting interface for straightforward bracket integration.
Airtac MIC Cushioned Mini Cylinder MIC20X700SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X700SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X700SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X700SCM Is Used
Long-Reach Diverting
Pushes packages across a transfer lane using the full 700 mm stroke, relying on the adjustable cushion to stop the 157 N thrust smoothly without slamming.
Film Roll Feed
Actuates a packaging material feed arm, where the stainless build withstands light washdown and the needle-set cushion protects the web material at high speed.
High-Bay Pusher
Handles vertical lifting of roughly 8 kg tote boxes, using the double-acting 20 mm bore to push goods smoothly into storage racks.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X700SCM the Right Cylinder?
When sizing this 157 N @0.5 MPa unit, consider stepping down to the MIC16 (100.5 N push) for lighter loads, or up to the MIC25 (245.3 N push) if you need more thrust. The adjustable cushion is essential for this 700 mm stroke when operating at high speeds or moving heavier masses, as it prevents harsh end-of-stroke impacts. Note that the cushion only decelerates the piston near the end of travel; it does not lock or hold the load. If position holding is required on air loss, install an external rod lock or pilot check valve.
The -S magnet enables CMSG, DMSG, and EMSG sensor switches for position feedback. You can mount this stainless cylinder using standard ISO 6432 brackets, including LB foot, FA flange, SDB pivot, or TC trunnion styles to suit your layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X700SCM FAQ
This 20 mm bore cylinder has a 1/8" port and a 700 mm non-standard stroke. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near stroke end and acts as a brake. For vertical loads, you must use an external rod lock or pilot check valve to prevent drifting. The -S magnet allows CMSG/DMSG/EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X700SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.