Airtac MIC Cushioned Mini Cylinder MIC20X75CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X75CM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X75CM
Delivering 157 N of push force at 0.5 MPa, the AirTAC MIC20X75CM is a double-acting stainless steel round-body mini cylinder built for demanding cycles. The CM round rear cover keeps ports and mounting neatly oriented, while the 1/8" port feeds the 8 mm piston rod. With a 75 mm stroke, it yields a safe working load of roughly 94 N and lifts about 8 kg vertically under a 2:1 safety margin.
Unlike standard bumper models, this variant features an adjustable air cushion at both ends. Turning the cushion needle lets you tune end-of-stroke deceleration, soaking up shock at high speeds to protect the load and cut noise. The riveted stainless barrel and rod resist mild corrosion and washdown. It uses the ISO 6432 mounting interface for standard mini brackets, but note this non-magnet SKU cannot take a sensor.
Airtac MIC Cushioned Mini Cylinder MIC20X75CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X75CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X75CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X75CM Is Used
Light Package Diverting
Uses the 157 N push force to deflect small cartons on a high-speed sorting line, relying on the tuned air cushion to stop the 75 mm stroke smoothly without slamming.
Small Part Ejection
Pushes machined components out of a fixture quickly; the adjustable needle absorbs the shock of rapid ejection, protecting delicate part surfaces from impact damage.
Flap Folding Control
Drives a folding arm on packaging equipment where the 8 kg vertical lift capacity and stainless construction handle mildly humid washdown environments reliably.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X75CM the Right Cylinder?
When sizing this 20 mm bore, stepping down to an MI16 bumper version drops the 0.5 MPa push force to 100.5 N, whereas stepping up to a MIC25 raises it to 245.3 N. Choose this adjustable-cushion model when cycle speeds are high or the moved mass creates significant end-of-stroke shock. The needle valve simply dials in the exact deceleration required.
Because this is a non-magnet SKU, it cannot accept CMSG, DMSG, or EMSG switches; you must specify an -S variant for position sensing. Furthermore, the air cushion only decelerates the piston near stroke end and does not act as a brake. If you need to hold a load vertically during air loss, install an external rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X75CM FAQ
This 20 mm bore cylinder has a 1/8" port and an 8 mm rod. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so CMSG, DMSG, or EMSG switches will not function. You must purchase the -S magnet variant for position sensing. The adjustable air cushion and stainless build remain standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X75CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.