Airtac MIC Cushioned Mini Cylinder MIC20X75SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X75SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X75SCM
Delivering 157 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for high-speed actuation. The Ø20 mm bore features a 1/8 inch port and an M8x1.25 male rod thread. A needle-set variable air cushion at both ends absorbs end-of-stroke shock, protecting your payload while cutting noise. The stainless barrel and rod resist mild corrosion and washdown environments.
Dropping into standard mini brackets via its ISO 6432 mounting interface, the CM round rear cover keeps the port orientation clean. Because this SKU includes the -S magnet, it is ready for CMSG, DMSG, or EMSG position switches. Factoring a 2:1 safety margin, it lifts about 8 kg vertically, giving a safe working load near 94 N.
Airtac MIC Cushioned Mini Cylinder MIC20X75SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X75SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X75SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X75SCM Is Used
Package Diverting
Pushes light cartons off a high-speed belt using 157 N of thrust, relying on the adjustable air cushion to stop the rod smoothly without slamming.
Small Component Ejection
Ejects machined plastic parts from a mold cavity, using the 94 N safe working load and ISO 6432 brackets for easy retrofitting.
Vertical Lift Gates
Raises an 8 kg access flap on a packaging machine, where the stainless build resists washdown and the cushion prevents end bang.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X75SCM the Right Cylinder?
When sizing this actuator, stepping down to the MIC16 drops the 0.5 MPa push force to 100.5 N, while stepping up to the MIC25 raises it to 245.3 N. Choose this adjustable cushion model over the standard MI bumper version when cycling at high speeds or moving heavier masses that need smooth deceleration. The cushion needle only slows the piston near stroke end; it does not function as a brake. If your application must hold a load vertically during air loss, add an external rod lock or pilot-operated check valve.
Mount this cylinder using LB foot, FA flange, SDB pivot, or TC trunnion hardware. The integrated -S piston magnet allows you to bolt on CMSG, DMSG, or EMSG sensors for end-of-stroke confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X75SCM FAQ
This Ø20 mm bore cylinder uses a 1/8 inch port. It generates 157 N push and 131.9 N pull at 0.5 MPa, or 219.8 N push and 184.7 N pull at 0.7 MPa. The theoretical maximum force is 32 kgf at 1.0 MPa.
The -S suffix means it has a built-in piston magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end; it is not a brake. For vertical load holding during air loss, install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X75SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.