Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB
Dial in end-of-stroke deceleration with the AirTAC MIC20X75SCMLB, a double-acting round-body mini cylinder built around a 20 mm bore and 75 mm stroke. Its integrated needle-set air cushion at both ends absorbs high-speed kinetic energy, protecting payloads and reducing noise far better than a fixed rubber bumper. The stainless-steel barrel and piston rod supply mild corrosion resistance for washdown or humid settings, and the 1/8" port feeds a robust 157 N push force at 0.5 MPa.
Designed to the ISO 6432 mounting interface, this unit drops directly into standard mini-cylinder brackets and clevises. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position sensing. In practical terms, it handles a safe working load of roughly 94 N and lifts about 8 kg vertically with a 2:1 safety margin. The CM rear cover and LB foot bracket supplied here simplify rigid base mounting.
Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB Is Used
Package Diverting
At 30-800 mm/s, this cylinder swiftly pushes light cartons off a main conveyor belt, using the adjustable cushion to halt the 157 N push force smoothly without jarring the package.
Parts Ejection
Ejecting molded or stamped parts from a fixture is fast and quiet; the needle-set cushion absorbs the end-of-stroke impact, protecting the 8 mm rod and the machine tooling.
Lab Sample Handling
The stainless build resists mild humidity in testing labs, while the 8 kg vertical lift capacity easily raises and lowers sample trays with precise, cushioned positioning.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB the Right Cylinder?
When sizing this 20 mm bore, compare it directly against adjacent options. Stepping down to the 16 mm bore drops your 0.5 MPa push force to 100.5 N, while stepping up to the 25 mm bore raises it to 245.3 N—choose the 20 mm when you need approximately 157 N of push within a compact ISO 6432 envelope. The adjustable air cushion is essential if your actuator runs near the 800 mm/s maximum speed or moves a heavy mass, letting you needle-tune the deceleration profile.
Remember that the air cushion only decelerates the piston near the stroke end; it is not a brake. If air pressure drops or the valve centers, the rod will drift, so fit an external rod lock or pilot-operated check valve to hold a suspended load. This SKU includes the -S magnet for electronic or reed switches and ships with an LB foot bracket for stable horizontal mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB FAQ
This 20 mm bore double-acting cylinder uses a 1/8" air port and an M8x1.25 male rod thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum of 32 kgf at 1.0 MPa.
The MIC features an adjustable air cushion at both ends; you turn a needle valve to tune deceleration and reduce shock at high speeds. Because this model includes the -S magnet, you can mount CMSG, DMSG, or EMSG switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X75SCMLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.