Airtac MIC Cushioned Mini Cylinder MIC20X80SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC20X80SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø20mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ20 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM8×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC20X80SCM
Tame high-speed end-of-stroke shock with the AirTAC MIC20X80SCM, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. Because it carries the -S suffix, a built-in piston magnet enables position sensing using CMSG, DMSG, or EMSG switches. The CM rear cover provides a specific mounting and port orientation for tight spaces, while the 1/8" port feeds the 8mm piston rod.
At 0.5 MPa this 20mm bore generates 157 N of push force and 131.9 N of pull, making its safe working load roughly 94 N. That translates to lifting about 8 kg vertically with a 2:1 safety margin. Unlike a fixed bumper, the integrated adjustable air cushion at both ends lets you dial in the needle valve to smoothly decelerate heavy loads, protecting your machinery and reducing noise at speeds up to 800 mm/s.
Airtac MIC Cushioned Mini Cylinder MIC20X80SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC20X80SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø20 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC20X80SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC20X80SCM Is Used
Package Diverting
Handles 8 kg cartons at high cycle rates on a sorting line, using the adjustable air cushion to softly stop the diverter arm without jarring the conveyor frame.
Filler Head Actuation
Raises and lowers a liquid filling nozzle, relying on the 157 N push force and washdown-resistant stainless construction to endure splash and chemical mist.
Small Part Ejection
Pushes molded plastic parts out of a press at speed; the needle-set cushion absorbs the end impact to protect delicate product finishes.
Is the Airtac MIC Cushioned Mini Cylinder MIC20X80SCM the Right Cylinder?
If your application requires less force, stepping down to the MIC16 bore yields 100.5 N of push at 0.5 MPa, whereas moving up to the MIC25 bore provides 245.3 N for heavier payloads. Choose this 80mm stroke configuration when you need moderate travel with smooth cushioning at high velocities. The adjustable air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If you need to prevent drift on air loss, install an external rod lock or pilot-operated check valve. This Ø20 size uses the standard ISO 6432 mini-cylinder mounting interface, dropping easily into standard brackets and clevises.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC20X80SCM FAQ
This 20mm bore cylinder uses a 1/8" port and an 8mm piston rod with an M8x1.25 male thread. It generates 157 N push and 131.9 N pull at 0.5 MPa, 219.8 N push and 184.7 N pull at 0.7 MPa, with a theoretical maximum force of 32 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion at both ends only decelerates the piston near stroke end to reduce shock; it is not a brake. The piston will drift on air loss, so use an external rod lock or pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC20X80SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.