Airtac MIC Cushioned Mini Cylinder MIC25X100CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X100CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X100CA
Tame high-speed end-of-stroke impacts with the AirTAC MIC25X100CA, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. It features a needle-adjustable air cushion at both ends to decelerate heavy loads smoothly, reducing noise and protecting your machinery compared to fixed rubber bumpers. Delivering 245.3 N of push force and 206.1 N of pull force at 0.5 MPa, it handles a safe working load of roughly 147 N.
This 25 mm bore, 100 mm stroke actuator uses a 1/8" port and an M10x1.25 male rod thread. It conforms to the ISO 6432 mounting interface for straightforward bracket integration. Equipped with a CA rear clevis cover, it pivots easily. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors; you would need the -S variant for position detection.
Airtac MIC Cushioned Mini Cylinder MIC25X100CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X100CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X100CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X100CA Is Used
Package Diverting
Pushes medium-weight cartons at high cycle rates on a sorting line, using the adjustable cushion to prevent harsh slams that could damage boxes.
Light Assembly Press
Drives a 100 mm stroke pressing action for bearing insertion, relying on the 245 N push force and smooth end-of-stroke deceleration.
Pallet Stop Gate
Acts as a pneumatic stop for incoming pallets, absorbing the kinetic impact through the tuned air cushion rather than jarring the frame.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X100CA the Right Cylinder?
When sizing this 25 mm bore actuator, stepping down to a MIC20 moves you to 157 N push at 0.5 MPa, while stepping up to a MIC32 provides 402 N. Choose this model when moving moderate masses at high speeds where the adjustable air cushion can be tuned to absorb kinetic energy. Remember the cushion only decelerates near the stroke end; it is not a brake. If you need to hold a vertical load during air loss, install an external rod lock or pilot check valve.
The CA rear clevis cover suits pivoting loads, and you can pair it with LB foot, FA flange, SDB pivot, or TC trunnion mounts. Because this exact SKU has no internal magnet, it cannot accept position switches. For CMSG, DMSG, or EMSG sensors, specify the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X100CA FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for sensing. The stainless steel build resists mild corrosion, and the adjustable air cushion at both ends decelerates the load near stroke end but does not lock or hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X100CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.