Airtac MIC Cushioned Mini Cylinder MIC25X100SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X100SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X100SCM
Dial in end-of-stroke deceleration with the AirTAC MIC25X100SCM, a double-acting round-body mini cylinder built on a stainless-steel barrel and rod for mild washdown resistance. Because it carries the -S suffix, a built-in piston magnet is ready for CMSG, DMSG or EMSG position switches. The rear CM cover provides a clean round-end cap orientation, and the 1/8" port feeds a 10mm piston rod threaded M10x1.25.
At 0.5 MPa this Ø25 bore pushes 245.3 N and pulls 206.1 N, scaling to 343.4 N and 288.5 N at 0.7 MPa. That translates to a safe working load of roughly 147 N, or about 12.5 kg of vertical lift with a 2:1 margin. Needle-set air cushions at both ends absorb high-speed kinetic energy to protect your payload, dropping smoothly into the ISO 6432 mounting interface for standard mini brackets.
Airtac MIC Cushioned Mini Cylinder MIC25X100SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X100SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X100SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X100SCM Is Used
Bottle Diverter Gate
Snaps a 100 mm diverter arm across a fast belt; the adjustable cushion halts the 245 N stroke softly so glass bottles are not knocked over.
Carton Flap Tucker
Tucks corrugated flaps at speed, using the stainless build to shrug off packing-line humidity while the needle bleed trims the final 10 mm of travel.
Light Press Module
Presses a small bearing into a housing with 147 N of safe force, relying on the 1/8" port and M10x1.25 rod for a compact ISO 6432 fixture.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X100SCM the Right Cylinder?
For lighter payloads the Ø20 bore pushes 157 N at 0.5 MPa, while stepping up to the Ø32 yields 402 N if you need more thrust. Choose this Ø25 when your 100 mm stroke runs at high speed and the adjustable cushion is required to prevent harsh impacts. The cushion only decelerates near the stroke end; it will not hold a load. Add an external rod lock or pilot check valve if the piston must resist drifting when air pressure drops. Mount it via LB foot, FA flange or TC trunnion, and rely on the -S magnet for sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X100SCM FAQ
This double-acting cylinder uses a 1/8" port and a 10mm rod with an M10x1.25 thread. It pushes 245.3 N and pulls 206.1 N at 0.5 MPa, pushes 343.4 N and pulls 288.5 N at 0.7 MPa, and reaches a theoretical maximum of 50 kgf at 1.0 MPa.
Needle-set air cushions at both ends decelerate the piston near stroke end to cut shock, but they do not lock the load. The -S suffix means a magnet is built in for CMSG, DMSG or EMSG switches; a SKU without -S cannot take a sensor.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X100SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.