Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X100SUTC is a double-acting round-body mini cylinder built for rapid cycling. Its stainless-steel barrel and Ø10 mm piston rod shrug off mild corrosion and washdown environments. Because this Ø25 bore falls within the Ø16-Ø25 range, it uses the ISO 6432 mini-cylinder mounting interface, dropping smoothly into standard brackets and clevises.
The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to eliminate shock and noise at high speeds, protecting your payload far better than a fixed rubber bumper. This specific configuration ships with a built-in piston magnet for position sensing, a U-style 90-degree rear cover for flexible porting, and a TC trunnion mount. It handles a safe working load of roughly 147 N, meaning it can lift about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC Is Used
Package Diverting
Handles 12.5 kg cartons at high speed on a sorting line, using the adjustable cushion to stop the diverter arm smoothly without jarring the conveyor frame.
Filler Head Actuation
Cycles a filling nozzle into position rapidly; the stainless build resists washdown chemicals while the needle valve damps the stroke end to protect the nozzle tip.
Vertical Parts Lift
Raises lightweight industrial components using its 245.3 N push capacity, relying on the TC trunnion to handle side loads during the vertical transfer.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC the Right Cylinder?
When sizing this model, consider the force boundaries of the MIC family. If you need less push, stepping down to the Ø20 bore drops the 0.5 MPa push force to 157.0 N. If your payload is heavier, moving up to the Ø32 bore increases that figure to 402.2 N. The adjustable cushion on this Ø25 cylinder is essential when operating at high speeds or moving substantial masses, as it prevents harsh end-of-stroke impacts.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a lock or brake. If your application must hold a vertical load during air loss or valve centering, the piston will drift, so you must add an external rod lock or pilot-operated check valve. This SKU includes the -S magnet, allowing you to mount CMSG, DMSG, or EMSG sensors directly. Without the -S suffix, a cylinder cannot accept any position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC FAQ
This double-acting cylinder has a 25 mm bore and a 10 mm piston rod with an M10x1.25 male thread. The air port is 1/8". At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push force is 343.4 N and the pull force is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
It features an adjustable air cushion at both ends that uses a needle valve to regulate deceleration, absorbing high-speed shock without acting as a brake. The -S in the model code denotes a built-in piston magnet, enabling you to mount CMSG, DMSG, or EMSG electronic or reed switches for precise end-position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X100SUTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.