Airtac MIC Cushioned Mini Cylinder MIC25X10CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X10CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X10CA
Designed for high-speed actuation, this round-body stainless steel mini cylinder uses a needle-set variable air cushion at both ends to decelerate the load smoothly. As a double-acting unit, the MIC25X10CA pushes with 245.3 N and pulls with 206.1 N at 0.5 MPa. The Ø25 bore features a 1/8" port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion and washdown environments.
Conforming to the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises. This specific configuration includes a CA rear pivot cover for clevis mounting. With a 10 mm stroke, it yields a safe working load of roughly 147 N and lifts about 12.5 kg vertically under a 2:1 safety margin. Note this SKU lacks the -S magnet, so it cannot accept CMSG, DMSG or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC25X10CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X10CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X10CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X10CA Is Used
Short-Stroke Clamping
Ideal for rapidly clamping small parts in machining fixtures, using the 10 mm stroke and adjustable cushions to prevent impact damage at cycle end.
Package Diverting
Provides fast 245 N actuation to push light cartons off a conveyor belt, with the needle-set cushion absorbing the high-speed stop shock.
Lid Pressing
Delivers reliable force to snap lids onto containers, leveraging the washdown-resistant stainless steel build for food packaging lines.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X10CA the Right Cylinder?
When sizing this 25 mm bore, dropping down to an MIC20 reduces the 0.5 MPa push force to 157 N, while stepping up to an MIC32 raises it to 402 N. The adjustable end cushions are essential if you are moving heavy loads at high speeds, as they absorb shock that would otherwise damage the mechanism. This model includes a CA back cover for pivot mounting. Remember that the air cushion only decelerates near the stroke end; it does not act as a brake. If you need to hold a load vertically during air loss, install an external rod lock or pilot check valve. Because this SKU has no -S magnet, position sensing is unavailable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X10CA FAQ
This double-acting cylinder uses a 1/8" port. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for position sensing. The adjustable air cushion only decelerates the piston and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X10CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.