Airtac MIC Cushioned Mini Cylinder MIC25X10SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X10SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X10SU
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder brings adjustable air cushioning to a compact 10 mm stroke. The needle-set cushion at both ends absorbs high-speed end-of-travel shock, protecting your payload while reducing noise compared to fixed bumper designs. Its stainless barrel and rod resist mild corrosion and washdown environments.
Conforming to the ISO 6432 mounting interface for Ø25 bores, it drops directly into standard mini-cylinder brackets and clevises. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position switches, while the U-style back cover provides a 90-degree rear port orientation. With a safe working load of roughly 147 N, it lifts about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X10SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X10SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X10SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X10SU Is Used
High-Speed Diverter
Snaps product off a fast belt using 245.3 N of push force, relying on the adjustable air cushion to halt the 10 mm stroke smoothly without slamming.
Carton Flap Tucker
Folds light cardboard flaps on a washdown packaging line where the stainless rod shrugs off moisture and the U cover keeps plumbing tidy.
Short-Stroke Clamp
Secures mild steel brackets for a machining step, applying a safe 147 N working load while a DMSG switch confirms the clamp via the internal magnet.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X10SU the Right Cylinder?
For lighter duties, the Ø20 MIC bore provides 157 N of push at 0.5 MPa, whereas stepping up to the Ø32 bore yields 402 N if you need substantially more force. The adjustable air cushion on this Ø25 model is essential when cycling at high speeds or moving a heavy load, as it prevents harsh end-stop impacts. Note that the cushion only decelerates the piston near the stroke end; it does not function as a brake.
If your application must hold position during air loss or valve centering, add an external rod lock or pilot-operated check valve, as the piston will drift. Mount this cylinder using LB foot, FA flange, SDB pivot, or TC trunnion hardware. The -S magnet enables CMSG, DMSG, and EMSG sensors for precise end-position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X10SU FAQ
This double-acting cylinder uses a 1/8 inch air port and a M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and is not a lock or brake. The piston will drift on air loss or valve centering; you must fit an external rod lock or pilot check valve to hold a vertical load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X10SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.