Airtac MIC Cushioned Mini Cylinder MIC25X110SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X110SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X110SCA
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X110SCA is a double-acting, round-body stainless steel mini cylinder built for demanding 110 mm stroke tasks. A needle-set adjustable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload while reducing noise. The stainless barrel and rod resist mild corrosion and washdown environments. Because this Ø25 bore uses the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises.
This specific SKU includes a built-in piston magnet for position sensing and features a CA pivot rear cover for clevis mounting. Operating on a 1/8" port with an M10x1.25 male rod thread, it delivers a practical vertical lift of about 12.5 kg using a 2:1 safety margin. The cushion mechanism only decelerates the piston near stroke end; it does not lock or hold the load.
Airtac MIC Cushioned Mini Cylinder MIC25X110SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X110SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X110SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X110SCA Is Used
Package Diverting
Uses the 245.3 N push force to rapidly deflect medium-weight cartons on a sorting line, relying on the adjustable air cushion to halt the 110 mm stroke smoothly without slamming.
Filler Head Actuation
Drives a vertical filling nozzle in a mildly washdown environment, where the stainless build resists moisture and the CA pivot rear cover accommodates slight misalignment.
Small Press Ejection
Pushes stamped small parts out of a die at high speed, using the needle-set cushion to decelerate the payload gently and prevent damage to fragile components.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X110SCA the Right Cylinder?
When sizing this 25 mm bore, stepping down to the MIC20X50 drops the 0.5 MPa push force to 157 N, while stepping up to the MIC32X75S raises it to 402 N. Choose this 245.3 N class when your application needs moderate thrust at high cycling speeds where the adjustable air cushion can effectively eliminate end-stop banging. For heavier or slower moves, the larger 32 mm bore is preferable.
Remember that a standard cylinder drifts when air pressure is lost or a valve is centered, as the cushion solely decelerates and never acts as a brake. To suspend a load safely, add an external rod lock or a pilot-operated check valve. The -S magnet on this model enables CMSG, DMSG, and EMSG switches, and you can pair the CA back cover with LB foot, FA flange, or TC trunnion mounts for your layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X110SCA FAQ
This double-acting cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in magnet for CMSG, DMSG, or EMSG switches. However, the adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. The cylinder will drift on air loss, so you need an external rod lock or pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X110SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.