Airtac MIC Cushioned Mini Cylinder MIC25X110SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X110SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X110SU
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles 110 mm strokes with precision. The adjustable air cushion at both ends lets you dial in deceleration to absorb high-speed shock, protecting your payload while reducing noise. Its stainless barrel and rod resist mild corrosion and washdown environments, and the built-in piston magnet (-S) supports CMSG, DMSG, or EMSG position switches.
Designed to the ISO 6432 mounting interface for Ø25 bores, it drops directly into standard mini-cylinder brackets and clevises. The U-style rear cover provides a 90-degree mounting orientation. Based on the 0.5 MPa thrust, it yields a safe working load of roughly 147 N, meaning it lifts about 12.5 kg vertically with a 2:1 safety margin. It uses a 1/8 inch port and an M10x1.25 male rod thread.
Airtac MIC Cushioned Mini Cylinder MIC25X110SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X110SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X110SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X110SU Is Used
Package Diverting
Pushes lightweight cartons off a high-speed belt line using its 245.3 N thrust, relying on the adjustable cushion to stop the rod smoothly without jarring the mechanism.
Filler Head Positioning
Moves a filling nozzle up and down through the 110 mm stroke, where the stainless build shrugs off washdown and the needle cushion prevents liquid splashing on impact.
Small Parts Ejection
Ejects molded components from a press using the 12.5 kg vertical lift capacity, using the ISO 6432 dimensions to mount directly into existing machine clevises.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X110SU the Right Cylinder?
When sizing this actuator, compare it against the adjacent bores in the MIC range. If you need less force, the MIC20 drops to 157 N push at 0.5 MPa; if your application requires more power, stepping up to the MIC32 provides 402 N. Choose this Ø25 model when your payload sits in that mid-range thrust class and you need the variable needle cushions to tame high-speed end-of-stroke impacts.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If air pressure drops, the piston will drift, so add an external rod lock or pilot-operated check valve to hold a suspended load. This SKU includes the -S magnet for sensors, and you can pair it with LB foot, FA flange, SDB pivot, or TC trunnion mounts.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X110SU FAQ
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. This bore size uses a 1/8 inch air port and an M10x1.25 male rod thread.
No, the adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. If you need to hold a load vertically during air loss, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X110SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.