Airtac MIC Cushioned Mini Cylinder MIC25X145SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X145SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 145mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke145 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X145SCA
Dial in end-of-stroke deceleration on your high-speed lines with the AirTAC MIC25X145SCA. This double-acting, round-body stainless steel mini cylinder features a needle-set variable air cushion at both ends, absorbing shock to protect your payload and cut workshop noise far better than a fixed rubber bumper. The stainless barrel and rod resist mild corrosion and washdown environments. Because the bore is Ø25, it uses the standard ISO 6432 mounting interface, dropping directly into existing mini-cylinder brackets and clevises.
In the 25 mm class, this unit delivers a push force of 245.3 N and a pull force of 206.1 N at 0.5 MPa, peaking at a theoretical 50 kgf at 1.0 MPa. For sizing a vertical lift, expect it to handle about 12.5 kg safely with a 2:1 margin, giving a safe working load near 147 N. The unit includes a built-in piston magnet (-S) for CMSG, DMSG, or EMSG position switches, and features a CA rear pivot cover. Air connections use a 1/8" port, and the M10x1.25 male rod thread mates with standard couplers.
Airtac MIC Cushioned Mini Cylinder MIC25X145SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X145SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 145 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X145SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X145SCA Is Used
Package Diverting
Stops and diverts cartons at 245 N push force, using the adjustable cushion to softly arrest the stroke at high cycle rates without jarring the mechanism.
Vertical Lift Gates
Raises lightweight access doors or material flaps, safely lifting around 12.5 kg against gravity while the stainless build withstands humid dock environments.
Component Ejection
Pushes machined parts out of a fixture at speed; the needle-set air cushion prevents the rod from crashing into the end cap, protecting delicate tooling.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X145SCA the Right Cylinder?
When sizing this 25 mm bore, step down to the MIC20 if your load is lighter—it yields 157 N push at 0.5 MPa—or move up to the MIC32 for heavier payloads requiring 402 N push. The adjustable cushion on this model is essential if you are running near the 800 mm/s maximum speed or shifting enough mass to slam hard at stroke end. Remember the cushion needle only decelerates the piston near the ends; it does not function as a brake. If the machine loses air, the rod will drift, so fit an external rod lock or pilot check valve to hold a suspended load. The CA back cover provides a rear pivot point for clevis mounting, and the -S magnet enables CMSG, DMSG, and EMSG sensor tracking.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X145SCA FAQ
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. This 25 mm bore cylinder uses a 1/8" air port and an M10x1.25 male rod thread.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, and EMSG switches. The adjustable air cushion at both ends only decelerates the piston near stroke end to reduce shock; it is not a lock. The cylinder will drift on air loss, so use a pilot check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X145SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.