Airtac MIC Cushioned Mini Cylinder MIC25X150CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X150CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X150CA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles 150 mm strokes with precision. The defining feature of the MIC series is the adjustable air cushion at both ends, letting you dial in a needle valve to absorb high-speed end-of-stroke shock, protecting your payload and reducing noise compared to fixed bumper designs. The stainless barrel and rod resist mild corrosion and washdown environments.
With a 25 mm bore, it uses a 1/8" port and an M10x1.25 male rod thread. This model drops directly into standard mini-cylinder brackets via its ISO 6432 mounting interface. For vertical lifting, it handles about 12.5 kg safely with a 2:1 margin. Note this specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors without upgrading to the -S variant. The CA back cover provides a rear pivot mount for angular alignment.
Airtac MIC Cushioned Mini Cylinder MIC25X150CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X150CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X150CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X150CA Is Used
High-Speed Diverting
Uses the adjustable air cushion to smoothly route 10 kg cartons at 700 mm/s without slamming at the 150 mm stroke end.
Vertical Flap Folding
Leverages the 245.3 N push force to fold heavy packaging materials, relying on the CA pivot to absorb side loads.
Pallet Component Pusher
Pushes parts onto pallets in damp environments, utilizing the stainless steel construction for mild corrosion resistance.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X150CA the Right Cylinder?
When sizing this 25 mm bore, step down to the MIC20 (157 N push @0.5 MPa) for lighter loads, or step up to the MIC32 (402 N push @0.5 MPa) if you need more thrust. The adjustable air cushion is essential here if you are running near the 800 mm/s maximum speed or moving heavy masses, as it prevents harsh end-of-stroke impacts. Choose LB foot, FA flange, or TC trunnion mounts to suit your frame.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If air pressure drops, the piston will drift and cannot hold position. For suspended or vertical loads that must remain fixed during air loss, install an external rod lock or a pilot-operated check valve. Because this base SKU has no magnet, order an -S version if you require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X150CA FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG switches. You must select the -S magnet variant for position sensing. The adjustable air cushions at both ends only decelerate the load near stroke end and do not lock or hold the piston in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X150CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.