Airtac MIC Cushioned Mini Cylinder MIC25X150SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X150SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X150SCM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder tackles demanding 150 mm stroke tasks. It features a built-in piston magnet (-S) for CMSG, DMSG, or EMSG position switches, and a CM round rear cover for straightforward port and mounting alignment. The 1/8" air port feeds a Ø10 mm piston rod with an M10x1.25 male thread.
Unlike fixed bumper models, the MIC series uses a needle-set variable air cushion at both ends to decelerate the load smoothly at high speeds, protecting your equipment from end-of-stroke shock. The stainless barrel and rod resist mild corrosion and washdown environments. Thanks to its Ø25 bore, it conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. Based on the 0.5 MPa thrust, it handles a safe working load of about 147 N, lifting roughly 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X150SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X150SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X150SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X150SCM Is Used
Package Diverting
Uses the 245 N thrust to push medium-weight cartons off a high-speed belt, relying on the adjustable air cushion to stop the 150 mm stroke smoothly without jarring the conveyor frame.
Filler Head Actuation
Drives a filling nozzle into position on a washdown-ready packaging line, where the stainless build resists moisture and the needle-set cushion prevents liquid splashing on rapid retraction.
Small Pallet Stops
Functions as a pneumatic stop for lighter pallets, using its 12.5 kg vertical lift capacity to raise catch mechanisms while the ISO 6432 mounting interface allows easy bracket swaps.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X150SCM the Right Cylinder?
If your application requires less force, the Ø20 MIC bore provides 157 N of push at 0.5 MPa, while stepping up to the Ø32 bore yields 402 N for heavier payloads. Choose this Ø25 model when moving substantial masses at high cycle rates, as the adjustable air cushion is essential for soaking up kinetic energy without slamming. Keep in mind the cushion only decelerates near the stroke end; it does not lock or hold the load. If you need to prevent drift on air loss or a centered valve, add an external rod lock or pilot-operated check valve. Pair this -S magnet variant with CMSG, DMSG, or EMSG sensors for precise end-position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X150SCM FAQ
This double-acting cylinder has a 25 mm bore and a 150 mm stroke. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, and 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa. It uses a 1/8" air port and an M10x1.25 male rod thread on a Ø10 mm rod.
No, the adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. The piston will drift if air is lost or the valve is centered. To hold a load securely, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X150SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.