Airtac MIC Cushioned Mini Cylinder MIC25X175SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X175SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X175SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for rapid actuation. The Ø25 bore uses a 1/8 inch port and an M10x1.25 male rod thread. A built-in piston magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches. The CA rear pivot cover supplies a robust clevis mount for articulated rod-end loads.
Twin adjustable air cushions at both stroke ends let you needle-set the deceleration to eliminate end-of-travel banging at high cycling speeds. The stainless barrel and rod resist mild corrosion and washdown environments. Derived from its 0.5 MPa push rating, the safe working load is roughly 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin. It conforms to the ISO 6432 mounting interface for standard mini-cylinder brackets.
Airtac MIC Cushioned Mini Cylinder MIC25X175SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X175SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X175SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X175SCA Is Used
Package Diverting
Uses the 245 N thrust to push parcels cleanly across transfer plates without slamming at stroke end.
Carton Sealing
Drives folding flaps at high tempo; the needle-set cushions absorb the shock to protect the tooling.
Pallet Loading
Lifts roughly 12.5 kg vertically with a 2:1 margin, positioning lighter components for pallet builds.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X175SCA the Right Cylinder?
If your payload is lighter, the Ø20 MIC bore drops thrust to 157 N at 0.5 MPa; stepping up to the Ø32 bore raises push force to 402.2 N for heavier mechanisms. This Ø25 model strikes a middle ground, and its adjustable cushions shine when cycling the full 175 mm stroke at high speed with a substantial payload. The cushion only decelerates the piston near the end caps and does not function as a brake. Because a standard cylinder drifts when air pressure is lost, install an external rod lock or pilot-operated check valve if you need to hold a suspended load safely in place.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X175SCA FAQ
This double-acting cylinder has a 1/8 inch air port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
It features adjustable air cushions at both ends that you tune with a needle to decelerate high-speed loads. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors. The cushion only slows the piston near the end of travel and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X175SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.