Airtac MIC Cushioned Mini Cylinder MIC25X180SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X180SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 180mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke180 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X180SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles mid-range automation tasks with ease. The 25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Because it carries the ISO 6432 mounting interface, it drops directly into standard mini-cylinder brackets and clevises without custom fabrication.
A defining trait of the MIC series is the adjustable air cushion at both ends, letting you dial in a needle valve to absorb high-speed end-of-stroke shock rather than relying on a fixed bumper. The stainless barrel and rod resist mild corrosion and washdown environments. With a safe working load of about 147 N, it can vertically lift roughly 12.5 kg using a 2:1 safety margin. The built-in -S piston magnet supports CMSG, DMSG, and EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC25X180SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X180SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 180 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X180SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X180SCA Is Used
Package Diverting
Pushes small to mid-weight cartons at high speed across sorting lanes, using the adjustable cushion to halt the 180 mm stroke gently without bouncing the load.
Film Sealing Press
Drives a sealing jaw with 245.3 N of 0.5 MPa thrust, decelerating smoothly at the crimp point to protect packaging film from tearing.
Vertical Tray Lifting
Raises component trays weighing up to 12.5 kg against gravity, relying on the stainless build for mildly humid storage environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X180SCA the Right Cylinder?
When sizing this 25 mm bore, stepping down to the MIC20 drops the 0.5 MPa push force to 157 N, while stepping up to the MIC32 raises it to 402 N. Choose this 180 mm stroke model for loads approaching the 147 N safe working limit where high travel speeds would otherwise cause a jarring impact. The adjustable cushions excel at decelerating heavy loads smoothly, but they only slow the piston near the stroke end and do not lock the rod. If your process requires the cylinder to hold a load vertically during a total air loss, add an external rod lock or a pilot-operated check valve.
The CA rear pivot cover provides a clevis mounting style ideal for articulating rod-end loads. You can mount it using standard ISO 6432 foot or flange brackets, and the -S magnet enables solid-state or reed sensor tracking along the stainless barrel.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X180SCA FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
It uses a needle-set adjustable air cushion at both ends to decelerate the piston smoothly at high speeds, reducing shock and noise. The built-in -S magnet allows you to mount CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X180SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.