Airtac MIC Cushioned Mini Cylinder MIC25X200SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X200SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X200SU
High-speed strokes hit hard, but the AirTAC MIC25X200SU uses a needle-set variable air cushion at both ends to decelerate the load smoothly, cutting shock and noise. This double-acting round-body mini cylinder features a stainless-steel barrel and Ø10 mm rod for mild washdown resistance, dropping directly into standard ISO 6432 mini-cylinder brackets.
Delivering 245.3 N of push force at 0.5 MPa, it serves as a solid mid-range actuator. The safe working load sits around 147 N, meaning it lifts about 12.5 kg vertically with a 2:1 margin. A 200 mm stroke gives ample travel, while the U-style rear cover provides a 90-degree mounting orientation. The -S suffix adds a piston magnet for CMSG, DMSG or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC25X200SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X200SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X200SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X200SU Is Used
Package Diverting
Uses the 245 N push force to deflect medium-weight cartons on a high-speed sorting line, relying on the adjustable cushion to prevent harsh impacts at the 200 mm stroke end.
Flap Folding
Drives packaging flaps rapidly into position during case erecting, where the stainless build handles mildly humid environments and the needle-set cushion ensures gentle closing.
Vertical Lowering
Lowers a 12 kg fixture smoothly using the 2:1 safety margin, with the U-style rear cover providing stable 90-degree mounting and the air cushion arresting the descent gracefully.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X200SU the Right Cylinder?
If you need less force, the smaller Ø20 bore provides 157 N of push at 0.5 MPa; stepping up to the Ø32 yields 402 N for heavier payloads. The adjustable air cushion is vital for this 200 mm stroke when operating at high speeds or moving substantial mass, as it prevents end-of-stroke banging. Remember the cushion only decelerates the piston near the end of travel—it is not a brake. To hold a load vertically on air loss, install an external rod lock or pilot check valve. The 1/8" port matches the Ø25 bore standard, and the -S magnet enables electronic or reed sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X200SU FAQ
This Ø25 mm bore cylinder features a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The variable air cushion at both ends uses a needle valve to trap exhaust air, decelerating the piston near stroke end to reduce shock—it is not a locking brake. Because this SKU includes the -S magnet, you can mount CMSG, DMSG or EMSG switches directly for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X200SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.