Airtac MIC Cushioned Mini Cylinder MIC25X20SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X20SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke20 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X20SCM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for rapid actuation. The adjustable air cushion at both ends allows you to tune the deceleration needle, effectively absorbing end-of-stroke shock at high speeds to protect your payload and reduce noise. Its stainless barrel and rod resist mild corrosion, making it suitable for washdown environments.
Featuring a 25 mm bore, a 20 mm stroke, and a 1/8" port, the unit conforms to the ISO 6432 mounting interface for straightforward bracket integration. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches for position sensing, while the CM round rear cover provides flexible port and mounting orientation. With a safe working load of roughly 147 N, it can vertically lift about 12.5 kg with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X20SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X20SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X20SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X20SCM Is Used
High-Speed Diverting
Rapidly sorts lightweight packages on a conveyor belt, using the adjustable cushion to softly stop the diverter arm without jarring the mechanism.
Component Seating
Pushes small mechanical parts into fixtures on an assembly line, relying on the 245.3 N thrust to seat components firmly and accurately.
Flap Folding
Folds cardboard flaps on an automated packaging machine, where the stainless steel construction withstands occasional washdowns and dust.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X20SCM the Right Cylinder?
When sizing this actuator, consider stepping down to the MIC20 bore if your application requires less force, as it provides 157.0 N of push at 0.5 MPa. Conversely, if you need more power, the larger MIC32 bore offers 402.2 N of push at 0.5 MPa. The adjustable cushion is essential when operating at the maximum 800 mm/s speed or moving heavy loads, preventing harsh impacts at the 20 mm stroke end.
Remember that the air cushion only decelerates the piston near the stroke end and does not function as a lock or brake. If the load must be held in place during an air loss event, install an external rod lock or a pilot-operated check valve. You can pair this -S magnet model with CMSG, DMSG, or EMSG sensors, and mount it using standard LB foot, FA flange, or TC trunnion hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X20SCM FAQ
This 25 mm bore double-acting cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N of push and 206.1 N of pull at 0.5 MPa, increasing to 343.4 N of push and 288.5 N of pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S designation means it has a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. The needle-set air cushion at both ends only decelerates the piston near the stroke end to reduce shock; it is not a brake. For holding a load on air loss, use an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X20SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.