Airtac MIC Cushioned Mini Cylinder MIC25X225CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X225CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 225mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X225CA
Tackle high-speed actuation with the AirTAC MIC25X225CA, a double-acting round-body mini cylinder built on a stainless-steel barrel and rod for mild washdown resistance. It conforms to the ISO 6432 mounting interface for Ø25 bores, dropping cleanly into standard mini brackets. The CA rear cover provides a pivot clevis for articulated loads. A 1/8" port feeds the 10mm piston rod.
Delivering 245.3 N of push force at 0.5 MPa, it lifts about 12.5 kg vertically with a 2:1 safety margin and handles a safe working load near 147 N. Its defining trait over a standard bumper cylinder is the adjustable air cushion at both ends: a needle valve lets you dial in deceleration to absorb end-of-stroke shock at high speed. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC25X225CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X225CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 225 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X225CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X225CA Is Used
Package Diverting
Handles fast diverting of 12 kg cartons on a conveyor, using the adjustable cushion to softly stop the 225mm stroke without jarring the package.
Pivot Clamping
Secures articulated fixtures via the CA clevis, applying 245 N of clamping push while the stainless body resists coolant mist.
Vertical Lift Gates
Raises and lowers light access gates, safely moving the 147 N working load with needle-tuned end-of-stroke deceleration.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X225CA the Right Cylinder?
When sizing this 25mm bore against the range, dropping down to the MIC20 yields 157 N of push at 0.5 MPa, while stepping up to the MIC32 provides 402 N. Choose this 225mm stroke model for fast traverses where the adjustable cushion is essential to prevent slamming. Because this is a non-magnet SKU, position sensing is unavailable; add the -S variant if you need CMSG/DMSG/EMSG switches. The CA clevis mount suits pivoting mechanisms.
Remember that the air cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If air pressure drops, the rod will drift. For vertical or suspended loads that must stay put during air loss, fit an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X225CA FAQ
This double-acting cylinder has a 25mm bore, a 10mm rod, and a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa. It features an adjustable air cushion at both ends and operates at speeds of 30-800 mm/s.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. The stainless-steel build and adjustable cushions are present, but the cushion only decelerates the load and will not hold it in place if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X225CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.