Airtac MIC Cushioned Mini Cylinder MIC25X225SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X225SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 225mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X225SCM
Dialing in end-of-stroke deceleration is effortless with the AirTAC MIC25X225SCM, thanks to its needle-adjustable air cushions at both ends that absorb high-speed shock. This double-acting round-body mini cylinder features a stainless-steel barrel and piston rod, providing reliable mild corrosion resistance for washdown environments. It uses the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises.
Delivering a push force of 245.3 N and a pull force of 206.1 N at 0.5 MPa, it handles robust loads with a safe working capacity around 147 N. The built-in -S piston magnet supports CMSG, DMSG, and EMSG position switches. Featuring a 25 mm bore, a 225 mm stroke, a 1/8" port, and a CM round rear cover for straightforward port orientation, it lifts about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X225SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X225SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 225 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X225SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X225SCM Is Used
Package Diverting
Swiftly routes parcels on a sorting line where the adjustable cushion prevents harsh slams during high-speed stroke endings.
Carton Sealing
Drives sealing heads on a packaging conveyor, using the 245.3 N push force to close flaps smoothly without crushing the cardboard.
Light Lift Gates
Actuates small loading ramps, safely lifting about 12.5 kg vertically while the stainless build resists humid dock environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X225SCM the Right Cylinder?
When sizing this 245.3 N push force unit, stepping down to the MIC20 gives 157.0 N at 0.5 MPa, while stepping up to the MIC32 provides 402.2 N. Choose this 25 mm bore when moving moderate masses at high speeds where the adjustable cushion is critical to prevent impact damage. The 1/8" port and 30-800 mm/s speed range accommodate rapid cycling. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If air pressure drops, the piston will drift, so add an external rod lock or pilot check valve for secure load holding. The -S magnet enables CMSG, DMSG, or EMSG sensors for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X225SCM FAQ
This double-acting cylinder features a 1/8" port and generates a push force of 245.3 N and a pull force of 206.1 N at 0.5 MPa. At 0.7 MPa, the push force is 343.4 N and the pull force is 288.5 N. It has a theoretical maximum force of 50 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. The piston will drift if air pressure is lost, so an external rod lock or pilot check valve is required for load holding. The -S magnet allows CMSG, DMSG, and EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X225SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.